Concern: Industry hotly discussed the Ministry of Industry and Information Waterproof Industry New Deal

On December 6, 2010, the Ministry of Industry and Information Technology released the No. 122 announcement on its official website -- "Guidelines for the elimination of backward production equipment and products for some industries (2010 edition)." Which involves the waterproof industry are: out of tar polyurethane waterproof coating, water-based polyvinyl chloride tar waterproof coating and PVC building waterproof joint material (tar type). At the same time, polyethylene polypropylene composite waterproofing membrane secondary heating composite molding production technology, annual output of 5 million square meters modified asphalt waterproof membrane and asphalt composite tire flexible waterproofing membrane production line, with an annual output of 1 million rolls below the asphalt paper Feather linoleum production line, polyethylene core composite material with a polyethylene core thickness of 0.5 mm or less, and polyvinyl chloride waterproofing membrane (S-type) are also included in the phase-out range. A 'rejection storm' for backward production capacity is raging like never before.

What are the subsequent impacts of the new waterproofing industry policy in the waterproof industry? This reporter interviewed relevant people in the industry.

The New Deal will expedite the reshuffle of the waterproof industry and talk about the No. 122 announcement issued by the Ministry of Industry and Information Technology (hereinafter referred to as the Ministry of Industry and Information Technology). The first sentence of Zhu Dongqing, chairman of the China Building Waterproofing Association, is: 'The new policy will speed up the reshuffle of the waterproofing industry' .

Zhu Dongqing explained: 'Announcement No. 122 requires' that the backward production process equipment and products listed in the catalogue shall be phased out within the prescribed time limit and shall not be transferred, produced, sold, used or adopted. 'With an annual output of 5 million square meters of modified bitumen waterproofing membrane production line as an example, the Catalogue requires that relevant departments not approve and approve new investment projects for a modified bitumen waterproofing membrane production line of 5 million square meters or less. The management department does not apply for production licenses, and the production licenses have been issued for withdrawal. In other words, the new policy not only involves the construction of a new waterproofing membrane production line, but also includes the requirements for the production capacity of the existing coil production line. '

The new policy of the Ministry of Industry and Water-proofing industry has raised the barriers to entry in the waterproofing industry. Zhu Dongqing said: 'In recent years, the construction industry has developed rapidly, and the high growth of the construction industry has provided a huge living space for the waterproofing industry. In this context, China's building waterproofing industry is currently growing at a rate of 30% per year. Behind the rapid development of the industry, because the barriers to entry are too low, driven by interests, a large number of companies have entered the waterproofing industry, 'gold rushing'. This includes small workshops and small businesses. The products they produce are shoddy and counterfeit. The phenomenon is serious. These behaviors have affected the image and development of the industry. It is undoubtedly a harm to companies that value technology and brands. For this reason, the China Construction Waterproofing Association also worked hard to call for the elimination of backward production capacity in the Outline of the “Eleventh Five-Year Plan” industry development plan. The Ministry of Industry and Information Technology released the "Guided Catalogue for Eliminating Obsolete Production Process Equipment and Products", demonstrating the country's determination to suppress backward production capacity. We agree with and support. '

Zhu Dongqing also stated that the waterproof products and waterproof production lines required to be eliminated in the Catalogue are a serious waste of resources and energy. Eliminating this part of backward production capacity will promote energy conservation and emission reduction, and accelerate the transformation of economic growth mode. Because only backward production capacity can be eliminated, product structure can be improved, product quality can be improved, and company benefits can be increased; the industrial structure can be optimized, and the level of technical equipment and industrial competitiveness can be improved; the contradiction of overcapacity can be alleviated, the balance between supply and demand can be guaranteed, and the healthy development of the industry can be promoted.

The New Deal will help increase the level of technical equipment in the industry. According to the relevant regulations of the “Regulations of the People's Republic of China on the Production of Industrial Product Licensing Regulations,” a building waterproofing company must obtain a production permit to qualify for the production of waterproofing membranes for construction.

Under the entrustment of the National Industrial Product Production Licensing Office, the National Waterproof Coil Product Examination Department of the National Industrial Product Production Licensing Office is responsible for the matters relating to the construction (permitting) certificate of production of construction waterproofing membrane products. The Ministry of Industry and Information Technology promulgated the "Guided Catalogue for the Elimination of Outdated Production Process Equipment and Products". What impact will it have on the production (permitting) permitting work for building waterproof coiled product production licenses? The reporter then interviewed the Deputy Director of the National Waterproof Coil Products Inspection Department of the National Office of Industrial Product Licensing.

According to the plateau, the Ministry of Industry and Information Technology released the “Guided Catalogue for the Elimination of Outdated Production Process Equipment and Products”. However, the relevant documents have not yet been officially issued to the Construction Waterproof Coil Products Inspection Department.

It is understood that in 2008, the Construction Waterproof Coil Product Inspection Department revised the "Implementation Rules for Construction Permits for the Production of Construction Waterproof Coil Products". The rules concerning the sampling of production license products and on-site inspection and determination rules have been stipulated. At the same time, the "Implementation Rules" require that after December 2, 2005, it is not allowed to newly build a production line of modified bitumen waterproofing membranes with a capacity of 5 million square meters per year or a flexible waterproofing membrane production line for asphalt composite tires.

Plateau told reporters that the Ministry of Industry and Information Technology "Guided by the elimination of outdated production process equipment and product directory" requires that the production license for waterproofing enterprises with a capacity of 5 million square meters or less has been withdrawn in accordance with law, and the building waterproofing coil product inspection department will strictly follow the instructions of the Ministry of Industry and Information Technology. After receiving formal notifications, we will study whether to amend the “Implementation Rules for Construction Waterproof Coil Products Production License”.

When asked by reporters, among the construction waterproofing companies that have issued production licenses nationwide, there are about 4 million square meters of enterprises with an annual output of less than 5 million square meters of modified bitumen-type waterproofing membranes and bituminous composite tire flexible waterproofing membrane production lines. Said that in 2009, the right to renew building waterproofing membrane production licenses had been delegated to the technical supervision bureaus of various provinces and municipalities. Therefore, the Ministry of Building Waterproofing Coil Products Inspection has not yet grasped the exact number of non-compliance companies.

The focus of the new waterproofing policy of the Ministry of Industry and Information Technology on "Closing Outdated Production Process Equipment and Product Guidance Catalogue" is to phase out the production of modified bitumen waterproofing membranes and asphalt composite tire flexible waterproofing membranes with an annual output of less than 5 million square meters. What is the difference between a production line of more than 5 million and a production line of less than 5 million? Cao Wenge, director of the design department of the Suzhou Waterproofing Research Institute of the China Building Research Institute, answered the reporter's questions. He pointed out that the modified bitumen coil production line includes sealed asphalt storage tanks, insulation batching tanks, colloid mills, asphalt metering equipment, thermal oil furnaces, oil immersion tanks (grooves), oil tanks (grooves), environmental protection devices and other supporting facilities. equipment. The production line with high production capacity has high speed, high configuration, and good peripheral devices, which is conducive to the stability of coiled products and can increase production efficiency.