Multi-claw synchronous clamping and milling fixture

Our factory produces X6132 milling Machine Screw (Fig. 1). The processing keyway width is 8_(+0.085)~(+0.085)mm and the length is 1260mm. It was originally clamped with 4 centering vise, the effect is not good. Now the milling clamp with four pairs of jaws is clamped synchronously (Fig. 2 works better. Rotating the T-bolt 14 forces the Screw shaft 21 to move to the left because it cannot move axially, and the screw shaft 21 is restricted by the nut 2 Rotate, the screw shaft 21 is fixed

UV Disinfection Lamp

Safe Function: The UV sanitize lamp with Volatile ozone can kill up to 99.9% of most viruses, airborne bacteria, and mold spores.Uses UVC sterilizer light, 360 ° degrees wide beam angle.Made of quartz material, long service life, high transmission rate, and better sterilization effect.

Use safety: It can be operated remotely through doors, walls, cabinets, etc. There is no limit on the angle, and you do not need to worry about being injured by ultraviolet radiation during operation. Use method 1: panel operation Use method 2: remote operation.

Applicable places:UV Disinfection Lamp can safely used in homes, as well as in hospitals, laboratories, malls, doctors″ offices, commercial buildings, food processing plants and other commercial and residential environments throughout the world - any big area place a concern for clean air exists.

Important :Exposing the Ultraviolet radiation for a long time will cause skin and eye burns, please pay attention to the Use instruction manual.People,pet animals and plants are Not Allowed to be present when the UV lamp lighting to work. Please leave away from the place of use immediately. To avoid damage to the skin and eyes, please DO NOT Stare at the ultraviolet light source

Uv Disinfection light,sterilizing UV Light,Germicidal lamp,UV lamp,disinfection lamp

Shenzhen Lanejoy Technology Co.,LTD , https://www.wire-spring.com