Paint construction process
1. Pay attention to the treatment of the surface of the chalk. When the paint is applied, the surface of the woodwork that needs oil decoration should be cleaned. If dust, glue stains, stains, pencil paths, etc. must be treated, the nail cap should be exposed on the surface. It was washed into the surface of the wood for 1-2 mm.
2. The second step is to brush the primer. Pay attention to the primer concentration when brushing the primer. When painting, the wood grain is from top to bottom, and it is evenly brushed twice from left to right. When painting, avoid the oil sag. The primer needs to brush more than four times (excluding the primer).
3, plug the putty, after the primer brushed over, then should be put on the nail nails, seams, etc. Putty, the preparation of putty is based on the color of the veneer by lithopone, water pigment mixed with water, when putty The putty is required to be fully coated and the wood surface is highlighted as the balance of the dry shrink sanding.
4. Sanding and polishing, waiting for the putty to dry, then sanding with 360# water sanding paper, the application force is uniform during operation, and the bottom should not be polished. Special attention should be paid to the corner of the sun. Color patching.
Paint construction precautions
1. Pay attention to “warmâ€: In life, many experienced decorators have indicated that the exterior latex paint often cracks during construction in winter, so the paint must be strictly in accordance with the temperature in the product description. Under normal circumstances, the ambient temperature of paint application should not be lower than 5 °C, the common color mixing paint should be above 0 °C, and the varnish is not lower than 8 °C. In addition, in the winter decoration, it is not too sloppy, it is best to choose some quality guaranteed brands, but also to avoid the adverse effects of winter cold on the maintenance of paint and coating.
2, open the window to ventilate the amount, so that formaldehyde and other harmful gases can be dissipated as soon as possible. But being able to ventilate is very particular. Although opening the window is conducive to the volatilization of harmful substances and the drying of the paint, as mentioned above, the oiler needs to "warm" and cannot start "frozen" too quickly. Premature ventilation allows outdoor cold air to come in, which can cause the paint to pulverize or even deteriorate. The wall paint that is not dry can be easily frozen, resulting in discoloration and peeling of the wall after warming up. Therefore, it is necessary to open the doors and windows after sufficient drying. In addition, the paint must be selected with the quality guaranteed. Don't be greedy for the time being, not only affect the decoration progress and appearance quality, but also misunderstand the health of the family's life.
3, pay attention to personal safety: It is understood that many people during the renovation period will be closed because of the cold, but the poor quality of building materials, especially paint, is extremely easy to emit toxic gases and flammable gases, resulting in indoor decoration is also likely to cause unnecessary The accident. An interviewer who was interviewed made it clear that he had a worker who had had an accident because of insufficient attention. He hoped that the owner could use the low-noise brand paint for the health of the workers and their families.
Editor's summary: What are the precautions about the paint construction process and paint construction? I hope to help everyone.
[Follow the WeChat public number "Jiuzheng Paint Network"; pay attention to surprises, scan code to view "If your husband is selling paint..." Jiuzheng Coating Network Exchange Group]
Cordless Reciprocating Saw Sabre Saw
The 20V Cordless Reciprocating Saw Saber Saw is used to cut tree and metal tube, with cutting capacity: 100mm for wood and 8mm for soft steel.
The Cordless Saber Saw is also can be used to cut meat with Stainless Steel Blade.
The Cordless Reciprocating Saw is convenient to use at anywhere, wireless power supply, 2Ah and 4Ah Battery is rechargeable.
The Cordless Reciprocating Saw Vibration is small when cutting the wood, work with 0-2900 rpm speed, 28mm stroke length.
The Cordless Tree Cutting Power Tool with a aluminum gear box, not plastic one, for better product performance.
The Cordless Reciprocating Saw with Quick Release Chuck, for easy blade change.
BTW, the pivoting shoe is adjustable.
Cordless Reciprocating Saw Sabre Saw,Cordless Sawzall,Reciprocating Saws,Ridgid Reciprocating Saw
Ningbo Brace Power Tools Co., Ltd , https://www.cnbrace.com