Model NO.: QN-KIT 01
Item: Rolling Code Indoor Receiver Kits for Garage Door
Color: Black
Weight: 104G
Set: 1PCS Receiver with 2PCS Transmitter
Working Code: Momentary, Toggle
Code Type: Rolling Code or Fixed Code
Transmitter Frequency: 433MHz or 315MHz
Operating Distance: 40-50m
Trademark: UCONTROL
Transport Package: Poly Bag, Blister, Paper Box.
Origin: China
HS Code: 85269200
Rolling code indoor receiver kits for garage door opener| Item | Rolling code indoor receiver kits for garage door opener |
| Set | 1pcs receiver with 2pcs tranmistter |
| Transmitter frequency | 433or 315MHZ |
| Operating distance | 40-50M |
| Working code | Momentary or toggle |
| Code type | Rolling code or fixed code |
The complete set of receiver and remote are used for the garage door sliding door gate
2 type, single channel and double channel
Biggest load current on relay:
12A 14VDC or 7A 120 VAC
PROGRAMMING:
Press the P1:
-1 time to program R1 in monostable mode
-2 times to program R2 in monostable mode
-3 times to program R1 in bistable mode
-4 times to program R2 in bistable mode
Hold down the key of the radio remote control that you
Would like to acquire until the ledl blinks.
ERASING:
There are two ways of erasing
1. Erasing a single code:
Press P2 for about two seconds(release the key); The LED
Will light up, press the key on the radio remote control
That you want to delete.
2. Erasing all codes acquired:
Press P2 until the LED turns on(about 8 seconds).
Remarks:
Red: Power Yellow: NA(Closed)
Black: Earth wire Blue: CM(Common)
Green: Antenna Gray: NF(Open)
Installs(Control Switch):
Link CM and NF separately to the two pins of the switch
Or the wired wall control
Roof & wall roll forming machine
Hangzhou Finding International Co., Ltd. , http://www.cnrollformingmachines.com