Galvanized Steel coil,sometimes also called full hard galvanized steel coil,is typically utilized to make
corrugated plate of roofs.Besides, it can also used in many other fields,such as machinery fields, light
industry, construction sector, transportation field, chemical industry, and home appliances
2. Galvanized Steel Coil technical processing
1) Uncoiled and sheared
2) Cleaned using a caustic solution, which can remove oil/grease, dirt, and paint
3) Entry looper to revised and then annealing furnace
4) Steel is dipped into the molten zinc bath
5) Cooled in a quench tank to reduce its temperature
6) Post treatment and crimper
3. Galvanized Steel Coil quality control
Strict procurement process---skillful technical workers---final products inspection(resistance to corrosion,
salt spray test, exposure test, machinability, thermal resistance)---standard packing
4. Galvanized Steel Coil advantages
1) Zinc coating has good adhesion
2) Resistant to corrosive factors
3) High strength&quality
4) Strict quality control system
5) Standard export sea-worthy packing
Â
| Standard | Steel Grades |  Application |
| GB/T 2518-2004 | 01 | Common commercial application |
| 02 | For mechanical engagement | |
| 03 | For stamping | |
| 04 | For deep drawing | |
| 220,250,280,320,350 | For structural components | |
| JIS G 3302-1998 | SGCC | Common application |
| SGCD1 | For stamping | |
| SGCD2 | For deep drawing | |
| DIN EN 10142-2000 | DX51D+Z | For common application and mechanical engagement |
| DX52D+Z | For stamping | |
| DX53D+Z | For deep drawing | |
| DIN EN 10147-2000 | S220GD+Z | For structural components |
| S250GD+Z | ||
| S280GD+Z | ||
| S320GD+Z | ||
| S350GD+Z |
Â
Brushed Aluminum Composite Panel
Brushed Aluminum Composite Panel consists of two sheets of corrosion resistant aluminum permanently bonded to polyethylene core material. The surface of the front aluminum is brushed finish, including two kinds of brushed finish, long brushed aluminum composite panel and short brushed aluminum composite panel. At the same time, other performance indicators must also meet the technical specifications of aluminum composite panels.
The brushed aluminum composite panel is a manufacturing process in which the aluminum sheet is repeatedly scraped out by sandpaper, and the process flow is mainly divided into three parts: deesterification, sand mill and water washing.
Alucobond Panel,Aluminium Panel Sheet,Aluminum Cladding Panels,Aluminum Plastic Composite Panel
Shenyang Xiandai Jixiang Decorative Material Co., Ltd , https://www.modernbond-acp.com