Quick-breaking agent is a kind of hydraulic hardening material with fast coagulation and hardening, high hourly strength and micro-expansion. The raw material is non-toxic and odorless. After strict screening, excellent performance, easy operation, and water reconciliation, it can be used on wet surfaces. The construction can also lead to water plugging and the effect is peculiar. This raw material can be widely used for plugging of houses, underground, underwater, sand-shaking tunnels, etc., water stoppage, repair, construction of perfusion and leaking works, plugging and maintenance, etc. .
1, first cut the leaking point or leaking seam into a vertical or cheek, clean up the debris;
2, the rapid sealing agent into the stirring pot, add a certain proportion of water, quickly mixed with mud paste, winter temperatures below 5 degrees Celsius, use 40 degrees Celsius water stirring;
3, put a good sealant cement on your hand, feel the cement slightly heated, the direction of the rapid leakage of water down, for a certain period of time before they can let go, generally within 10 minutes may block the water;
4, after blocking the water with a polymer waterproof mortar to wipe the surface, the surface can be maintained for three days;
5, for the seepage pit, you can directly put the dry plugging agent dry powder into the pit, and then use your foot to stop, then loosen after hardening;
6. For severe leaking cracks, drill a drainage hole at a severe leak to slow the leakage in the rest, then block the drainage hole and then use a polymer waterproof mortar to wipe the surface.
Main components: It consists of hard, high-strength cement clinker, chemical admixtures, binders and various auxiliary materials, powdered substances.