When using the sun room, use a better quality material to avoid hidden dangers.
Wall structure settlement can be repaired
The top floor of the sun room should be inserted into the load-bearing wall of the house in order to play a good role in convergence. The complete construction process involves grooving the wall and inserting the glass or insulation board that is used for the top surface of the sun room, so that the original wall structure is pressed onto it. In addition, in order to ensure that there is no water seepage during the rain, we must add a certain degree of slope.
Because most of the walls of the house are external thermal insulation, the plastering layer of the external wall and the cast-in-place concrete cannot be well combined. Cracks will appear on the wall for a long time, and the seepage phenomenon will easily occur when it rains. Once the original structure of the house wall is in trouble, the contact between the sun room and the wall will inevitably leak.
If the wall structure is settling, it can be found by the manufacturer of the sun room. The specific method is to remove the insulation layer at the cracks in the external wall, reinforce it, and then fill in the insulation material again, and do it again to waterproof. The re-made insulation layer can be selected from polyurethane and coil waterproof materials. The key is to make the details so that it can avoid seepage problems in the future.
Material aging needs to change material
The sun room is a building with an integral frame structure, and the glass on the top is more stressful. If the frame structure is not firm, the entire sun room will be slightly deformed, and the waterproof glue at the junction between the wall and the frame may slightly crack and lose its waterproof effect.
If the leakage is not serious, repair it with a sealant at the cracked area. If the water leakage is serious, it may be because the materials used in the frame structure are aging. It is difficult to solve the problem by simple repair. It is recommended to replace the more durable materials with the sun room. Use good quality framework materials to avoid leaving hidden dangers for future life.
In addition to trying to choose a brand company to re-make the sun room, you can also judge the quality of the sun room through some tips. A look at the material itself, including the material of the component, the quality of the assembly, the appearance of the effect; second look at the structure, carefully check the structure of the seal, stability; 3 look at the hardware, pay attention to the brand and handles, fasteners, connectors, etc.; Glass material, specifications and performance indicators.