Instantaneous plugging agent is mainly used for quick plugging and stopping of water in mines, tunnels, culverts, underground buildings, drainage dams, pools, and toilets. It can be formulated into mortar or concrete for structural anchoring, equipment foundation foot grouting and retention. , cementing and engineering repairs.
1, the proportion of ingredients: powder water = 1? 0.25 ~ 0.35
2, the appropriate depth of the leaking parts of the water, with this product, add water, quickly mix and pinch into a little smaller than the leakage of the size of the material group, stop for a while to squeeze the dough group to have a hard feeling when the plug into the leak, hand or suitable tools Press to make it squeezing around, you can instantly plug the leak; deal with diffuse infiltration to apply repeated scraping construction, you can gradually plug the capillary leak hole.
3, when the amount of water is large, gauze, tissue paper and other absorbent materials can be used to wrap the product according to the size of the leaking mouth, and then plug it into the leaking port, and then use a suitable tool to press for a certain time to plug the leak.
4. Impervious protection is performed on the surface with a layer of anti-leakage agent with a thickness greater than 5mm on the surface after the leakage is blocked.
5, before plugging, leaking around the need to use 'anti-seepage sealing agent' for waterproofing, etc., have a certain strength and then plugging to prevent the construction of water may leak from other parts around the leaking mouth.
6. After the construction is completed, check if the construction site is too dry. Moisturization should be carried out for 2 to 3 days.