In order to process the end face of the magnetic conductive bowl as shown in Fig. 1, our factory designed and manufactured the simple non-stop quick fix fixture for the car end face shown in Fig. 2. The jig is composed of a positioning mandrel 2, a clamping shaft 4, and the like. In use, the lathe chuck is removed, the positioning mandrel 2 is loaded into the taper hole of the lathe spindle, and the clamping shaft 4 is mounted on the top shaft of the live tip 6, when the workpiece is tightened to the rotating positioning mandrel 2
The Single Side Formwork Support system can bear the concrete side pressure from the single-sided formwork and transmit it to the substructure or foundation. It can be used in conjunction with all wall formwork. In addition, the SB single-sided bracket system can be used as a horizontal platform bracket with strong load-bearing capacity; all connecting parts can be directly installed on the single-sided bracket system.
Single Side Formwork Support,Single Side Steel Support,Wall Formwork Support,Sided Formwork Support
Anshan Lijian Engineering Group Co. LTD , https://www.lijianformwork.com