Visit the newly opened property
As more and more thoughts are being spent on the design and decoration of the model houses by the developers, some of them are selling ordinary houses of 30,000 to one square meter, a house of more than 100 square meters, and commercial development. Million to decorate, not inferior to high-end apartment per square meter million, or even more expensive than the house, this model room is obviously overplayed. Moreover, the more beautiful model homes show the advantages of homes while also concealing some existing defects. Some real estate experts remind consumers that when purchasing a home, they should pay more attention to model homes and learn to see the “doorway†from fancy renovations.
Some model houses are built before the construction of the property has not yet been built, the developer chooses a beautiful detached house from a beautiful environment; the other is to do a model house in the actual building that has been capped or will be capped. Regardless of the model, developers will design and decorate it carefully so that the model houses can be as short as possible. The author reminds that there will be a more or less gap between the general model room and real room.
When looking at the model house, the model house is always decorated with many lights. Often there is an aisle, and more than 10 spotlights will be arranged on the roof, which will make people feel a moment as soon as they enter the door. These lights are not only for decoration, but also have the effect of expanding space. However, the actual situation is that this kind of home decoration is not only expensive, but also has a high cost in the later period, and it is easy for buyers to neglect the lighting of the rooms themselves. You can let the salesperson close all the lights and realize whether the natural light in each part of the room is adequate; ask which equipments should be available when the house is handed over, which are the later designs of the developer, and which are included in the house price; you or It is best to find a ruler to measure whether the area of ​​the model house and the sale house is the same. In short, the model room is just a "three-dimensional map," and buyers should not be easily confused by their beauty.
Then there is the indoor pipeline. There is no pipeline in the general model room. For the sake of improving the fitting effect of the developer, the model house will not be provided with pipeline lines such as water, gas, and heating, which will make the room in the model room look very bright.
Another is the placement of furniture. In general, the furniture placed in the model room should be smaller than the normal family. Moreover, the necessary cabinets for the average family, many developers do not try to be in the model room, more emphasis on the color of the furniture itself. Harmony and fashionable styles to enhance the overall effect of the interior. In this case, the model house will appear larger and more beautiful than the same size house.
All these things, we need to keep our eyes open when we look at the model house and carefully drop into the beautiful "trap."
Model House Entrance Decoration Restaurant Decoration Housing Decoration Design Furniture House Decoration Model House Design House Decoration Model Room Model House Design House Decoration Model House Family Decoration Model House House Model Decoration Model House Decoration Model House Cabinet Cabinet Door Apartment Decoration
The full ceramic ball bearings listed below are supplied with rings and balls made from zirconium dioxide (ZrO2). These zirconia bearings are available as full complement (no cage) or with cages made from PTFE, PEEK or 316 stainless steel.
These are non magnetic, non-conductive and highly corrosion resistant to most chemicals although ZrO2 bearings are not recommended for prolonged contact with steam. Full complement bearings or those with a 316 stainless cage can be used up to 400°C while bearings with a PEEK or PTFE cage can cope with temperatures of up to 250°C. For temperatures below -70°C, PTFE or 316 stainless steel cages are preferred. Standard radial clearance for full ceramic bearings is C0 but other clearances can be supplied to order.
ZrO2 ceramic bearings are generally used for their extreme temperature capabilities, excellent corrosion resistance or non-magnetic properties. Other sizes can be supplied on request.
The Description of Ceramic Bearings:
Compared to steel, Ceramic ball Bearings have many specific advantages. They offer superior corrosion and heat resistance, higher dimensional stability, and lower density, which facilitate high speed. Ceramics are superior to steel in heat and corrosion resistance, and are lightweight and extremely hard as well. Consequently, ceramic rolling bearings can be used in environments where conventional steel bearings cannot. That is to say, the superiority of these bearings makes it possible that they can be applied in some special environments.
Firstly, they can be used in corrosive environments. Compared to stainless steel bearings, hybrid and all Ceramic Bearing lasted three and twenty times longer respectively. It is presumed that water readily adheres to silicon nitride and forms a better lubrication film, leading to extended bearing life.
Secondly, they can be performed in corrosive agents. Generally, silicon nitride has excellent corrosion resistance. However, corrosion resistance varies depending on the type and quantity of sintering additives, and certain corrosive agents decrease in hardness and flexural strength. In such situation, it is can be proved that the carbide-based ceramic bearings are the most effective.
Thirdly, they can be used in high-temperature vacuum. An all-silicon nitride Ball Bearing with a self-lubricating laminated cage (mainly composed of MoS2) and with MoS2-coated rings and balls proved superior in durability in a high-temperature vacuum environment. Compared with the hybrid bearings, the all-ceramic bearing was superior in both dynamic frictional torque and life.
Fourthly, they can be performed with poor lubrication. As ceramics are extremely hard and have outstanding wear resistance, they outperform other materials in bearing life without lubrication. According to a test, the steel bearing seized within a short period while the hybrid and all 627 Ceramic Bearings, though sustaining wear, did not. And the all-ceramic bearing sustained considerably less wear than the hybrid bearing, indicating that its endurance life is much longer.
Cermic Ball Bearing,Full Ceramic Bearing,Hybrid Ceramic Bearing,Self-Aligning Full Ceramic Ball Bearing
Shijiazhuang Longshu Mechanical & Electrical Equipment Trading Co., Ltd. , https://www.longsbearings.com