The vibrating screen should be started without the material on the screen surface. Try to avoid the start of the material, and the sieve machine can be fed after it is running smoothly. Before the shutdown, the feed should be stopped first, and then the sieve material should be removed before stopping.
During the working process, the operation of the sieve machine should be observed frequently. If the movement is abnormal or abnormal, it should be stopped and checked in time to find out the cause and eliminate the fault.
The vibrator bearing is lubricated with No. 2 lithium base grease. Under normal circumstances, the grease should be filled once every two months. The filling amount should not be too much, otherwise it will cause the bearing to overheat. After using the vibrator for 6 months, check the grease. If it is found to be dry or has a hard block, it should be cleaned and replaced with new grease. The bearing should be cleaned and inspected once a year.
Our Needle selector frame is applied in computerized flat knitting machines, vamp machines and circular knitting machines
These kinds of products were forestalled by Japan/Taiwan suppliers before 2009.
From year 2010, we started our research & developed various kinds of needle selector frame for Chinese market. After the success of the sampling, these kinds of needle selector frame got a unbelievable blooming in China. In 2016, we produced and sold more than 1000, 000pcs.
Now, we are still working hard on the designs and try to conquer the problems what we faced to ensure our parts more perfect in the near future.
Nowadays, our needle selector frames are not only supplied in Chinese market but also sells well in southeast of Asia.
If you are interested with our designs or products, Please feel free to contact with us right now.
Needle Selector Parts,Knitting Machine Needles,Knitting Machine Spare Parts,Knitting Machine Parts
SHAOXING QIFENG AUTO PARTS CO., LTD. , https://www.sxqfap.com