One of the public toilets will feel awkward, that is, there is no partition. For this situation, everyone should protect their privacy and prevent the disclosure of personal information. The partition device of the public toilet is a kind of device that is more intimate and private. It can protect people's shyness. So, do you know a little about the size of the public health partition? Then let Xiaobian take everyone to see it together. Take a look at the exciting content of the public toilet partition size .
Public health partition size 1:
The flat design of the public toilet should be set up in the toilet, urinal and washroom compartments, each room should have an independent function. The urinals must not be set in the open air. Male and female passages, shielding walls or objects should be placed at the entrance of the toilet. Each toilet should have a separate unit space, the partition plate dividing the unit space and the distance between the door and the ground should be greater than 100mm and less than 150mm.
The height of the partition plate and the door from the floor: one type of second class public toilet is greater than 1.8m, and the third type of public toilet is greater than 1.5m. The stand-alone urinal station should have a partition plate with a height of 0.8m.
Public health partition size two:
Public toilets should adopt advanced, reliable and easy-to-use water-saving sanitary equipment. The water-saving function of public toilet sanitary appliances shall comply with the current industry standard "Water-saving domestic water appliances" CJ 164. The toilet should use a flushing system with a water consumption of 6L per time.
For public toilets that use biological treatment or chemical treatment of sewage and water for flushing, the treated water quality must meet the requirements of the current national standard “Urban Wastewater Reuse and Municipal Water Quality†GB/T 18920.
Public health partition size three:
Public toilets should be arranged in a reasonable manner. Each toilet seat should not be less than 40m3/h, and each urinal should not be less than 20m3/h. The natural ventilation should be given priority. When the amount of ventilation is insufficient, mechanical ventilation should be added. The ventilation frequency of mechanical ventilation should be above 3 times/h.
When mechanical ventilation is set, the vents should be set above 1.75m above the è¹² (sitting, standing) position. The toilet should use a front flushing squatting device with a water seal function, and the urinal should be a semi-mounted toilet. When there are conditions, the air exchange method of single toilet exhaust can be adopted. The odor of public toilets in use should comply with the current national standards "Urban Public Toilet Sanitary Standards" GB/T 17217 and "Odor Pollutant Emission Standards" GB 14554.
Public health partition size four:
The wall of the public toilet must be smooth and easy to clean. The ground must be laid with anti-seepage and non-slip materials.
The building ventilation, lighting area and floor area ratio of public toilets should not be less than 1:8, and skylights can be added when the side wall side windows cannot meet the requirements. A window can be added to the south.
The indoor clear height of public toilets should be 3.5 ~ 4.Om (can be reduced when the skylight is installed). The indoor floor elevation should be 0.15m higher than the outdoor floor. The septic tank is built indoors and underground, and the floor elevation should be determined by the septic tank drain. When using cast iron drains, the slope of the pipeline shall comply with the requirements of Table 3.3.10.
Public health partition size five:
The length of each toilet seat should be 1.00~1.50m and the width should be 0.85~1.20m. The depth of each urinal station (including urinal) should be 0.75m and the width should be 0.70m. Independent urinal spacing should be 0.70 ~ 0.80m.
The width of the open doorway outside the single-row toilet in the toilet should be 1.30m, not less than 1.00m; the width of the open-door walkway outside the double-row toilet should be 1.50~2.10m.
The public toilets of all types of public toilets should not be exposed to the outside line of the toilet. There should be partitions between the toilet seats.
The groove depth of the trough type water flushing toilet shall not be less than 0.40m, the width of the bottom of the trough shall not be less than 0.15m, and the upper width shall be 0.20~0.25m.
A wash basin must be provided for public toilets. Public toilets should be provided with a strong, corrosion-resistant hanging hook for each toilet seat.
The minimum height of the single-story public toilet window sill from the indoor floor shall be 1.80m; the minimum height of the double-layer public toilet upper sill from the floor shall be 1.50m.
Public health partition size six:
If the toilet seats of male and female toilets exceed 20 hours respectively, double entrances and exits should be provided.
The area of ​​the toilet management room should be 4~12m2, and the area of ​​the tool room should be 1~2m2.
The trough-type public toilets should be flushed by male and female toilets. When using the flushing tank, it must be flushed from the male toilet to the female toilet.
When building a multi-level public toilet, the barrier-free toilet room should be located on the ground floor.
Import and export of men and women in public toilets must have an obvious gender mark, and the sign should be placed on a fixed wall.
Public toilets should have anti-fly and anti-mosquito facilities.
In places where the requirements are relatively high, a public toilet can be set up in the third toilet. The third bathroom should be set up independently and should have special signs and instructions.
How about, I read the relevant introduction to the size of the public health partition, and I also learned a lot about the public sanitation partition size. I hope that you can learn more about home improvement knowledge through this article, and you will be able to create a more perfect home environment. Thank you for reading this article and your support and love for Xiaobian. If you want to get more information about home improvement, please continue to pay attention to the decoration home network.
More related wonderful reading:
Public health partition size standard, public toilet partition decoration
Laser Line Generator Lenses, also known as Powell lenses, generate a straight, uniform laser line by fanning out a collimated beam in one dimension, as shown in the diagram above. The apex of each lens features an aspheric curve that evenly distributes the optical power, resulting in an intensity variation of less than 25% over the center portion of the line. You will get more even energy distribution along the laser line than using the rod lenses and lenses.
Custom Powell Lens,Standard Powell Lens,Laser Line Generator Lens,Optical Standard Powell Lens
ChangChun Worldhawk Optics Co.,Ltd , https://www.worldhawk-optics.com