In the decoration, it can be said that the ceiling is also playing an important role. This material can not only cover the exposed lines in the decoration, but also can play some decorative effects, especially like some kitchens and toilets must install it. The following Xiao Bian will introduce to you how to choose the plastic gussets and what is the main purpose of the gussets.
Plastic buckle how to choose
1, to know the plastic buckle plate wall thickness of not less than 0.7mm, with particular attention to the use of the surface, in general, as long as the regular manufacturers can meet this requirement.
2. You can also consider folding a section of the gusset by hand so that you can use both hands to catch the horizontal and vertical bends. For example, like some inferior plates, if they are easily folded, they will break and crack, but like some high-quality plates, Even if you have permanent deformation during use, it will not break or crack.
3, must choose to remember to look at the degree of sawing and the rough surface of the inner surface of the board, so that it can be seen that it is a good quality of the buckle board, strength and toughness are good, the board surface and the inner ribs and other parts in the saw At the same time, there is a possibility of collapse, and at the same time, the kerf is also flush and there will be no burrs, cracks, etc. Like some inferior gussets, the kerfs of the kerf will burr, and its internal ribs and The upper and lower sides of the board may be easily raised and cracked, and the inner surface is rough, and there may be some air bubbles on the inner ribs.
4, there is a way you can use the adhesive tape torn light film surface, so that you can stick the adhesive tape along the length of the plate average on the surface of the plate, remember that there must be no bubbles in the plate and adhesive tape , closely combined with the job, the paste length is generally about 0.5m, this time you can quickly remove the tape from the board surface. If the glazing film is not peeled off, then it can be shown that the surface of the gusset plate has a good adhesion of the optical film. If the adhesion of the optical layer on the surface of the gusset plate is poor, the surface glazing film can easily peel off.
5. At the same time, you can also try to use nails to test the printing pattern of the printing surface printing plate. Generally speaking, there will be a layer of light film on it. This also plays a role in the protection of patterns and patterns. The film must have a certain degree of The hardness so that it has its abrasion resistance. At the same time, remember to check the hardness of the optical film. At this time, you can try to use the surface of the optical film to go back and forth, and then observe whether there are any scratches. In general, like some high-quality gussets, it will not leave scratches. If scratches appear, it can indicate that the glazing film of this printed pattern has poor hardness.
What is the main purpose of the pinch plate?
Buckle plate can be said that this material is also more commonly used in a room material, mostly PVC material. This material is more suitable for ceilings in kitchens or bathrooms. The production process is also divided into several categories, such as ordinary printing, mirror processing, thermal transfer, and lamination. To know the color of the buckle board is also divided into several types, and there are optional patterns. The gusset plate also has an aluminum gusset plate, and the aluminum gusset plate can be said to be one of the most common ceiling materials currently available.
Summary: Regarding the selection of the plastic gusset plate and the main purpose of the gusset plate, the relevant content is introduced. The plastic gusset plate must refer to the above points when it is selected, so that the selected product can meet the needs of consumers. At the same time, it is also a good quality product.
In generally, the Window Screen including Stainless Steel Window Screen, Aluminum Window Screen, alloy window screen, fiberglass window screen, etc .
The weave type is flat weaving.
Surface treatment of window screen: painted, glavanized, PVC, etc .
The window screen is generally used in hotels, public construction, civil buiding block of the mosquitoes and other insects.
Advantages of window screen :
light weight
good toughness
embroidery
ventilated good corrosion resistance
easy to clean
Window Screen
Window Screen,Aluminum Window Screen,Plastic Window Screen,Stainless Steel Window Screen,Stainless Steel Wire Mesh
ANPING COUNTY SHANGCHEN WIREMESH PRODUCTS CO.,LTD , https://www.scfiltermesh.com