The bathroom facilities of most old houses are relatively poor and cannot meet people's living needs. Therefore, many families will renovate the bathrooms. What are the steps bathroom remodeling, bathroom remodeling how much it costs? Let's take a look!
What are the steps of bathroom renovation
First, the renovation of the bathroom construction
1. Wall surface
When the bathroom is reformed, it is necessary to first deal with the wall surface, remove the original old wall brick, and then use the cement mortar to level the wall. The purpose is to facilitate the formation of the later tile lay and it is not easy to fall off.
2. Water lines
Then according to the new design drawings, re-arrange the water pipe line. Water pipes and wires must go from the wall to the top, especially the water pipes. This way of installation can prevent the pipes from breaking and reduce the burden of maintenance.
3. Waterproof
Of course, the most important thing is the bathroom waterproof, wall waterproofing is recommended to use rigid waterproof, not only can play a role in waterproofing, but also to avoid empty walls. The ground can use flexible waterproof, waterproof coating to brush evenly, the ground and wall joints need to brush 30cm, need to do after the completion of 24 hours closed water test.
4. Tiling
The wall tiles of the bathroom are mainly beautiful, and the floor tiles are the best choice for non-slip, easy-to-clean tiles. When paving, the floor drain should be lower than the entire floor to facilitate drainage.
Second, the transformation of bathroom renovation
The occupancy rate of the bathroom is very high, so it is very important for its soft-loading arrangement, such as basins, toilets, lockers, etc., to be properly designed. It is also necessary to make full use of the good corners, design some beautiful storage table tops, and put the toiletries in the storage baskets to make full use of the space and look neat.
What is the bathroom renovation cost?
1, demolition and reform costs
If the bathroom needs to be demolished, the cost will be higher, and now many commercial houses will have some changes. Including labor costs, as well as demolition, removal and material transportation costs about 1,000 yuan.
2, wall tiles and floor tiles
When paving the tiles, you must first level the floor, and the surface of the walls needs waterproof construction. The cost is about 900 yuan. Floor tile costs also depends on the material you choose, ordinary tiles about a few dollars a piece.
3, ceiling costs
The bathroom usually requires ceilings, and the bathroom is located in a special place, so the ceiling material is more exquisite. The bathroom ceiling material should not only be beautiful and easy to clean, but also take into account the waterproof, such as waterproof plasterboard or buckle ceiling price of about 500 yuan.
Xiaobian quotations: The above is about the bathroom renovation steps, bathroom renovation costs content, I believe we all understand it! When the bathroom is remodeled, it must be considered waterproof, and the waterproof will not affect the future use.
Bathroom renovation
1.Application : For Electronical Parts
2.Dimension: Customized dimension, OEM & ODM
3.Material: A6063, A6061, A3003 and other series alu alloy
4.Suface treatment: Anodizing, polishing, turning ,power coating, mill finish etc
5.Equipment: CNC ,extruding machine, cold drawn machine, heating oven, straightening machine, cutting machine
|
OD |
OD Tolerance |
ID Tolerance |
Roundness |
Straightness |
Circular run-out |
|
φ16-20 |
±0.02 |
±0.02 |
0.01↓ |
0.015↓ |
0.05↓ |
|
φ20-30 |
±0.02 |
±0.02 |
0.01↓ |
0.015↓ |
0.05↓ |
|
φ30-50 |
±0.05 |
±0.05 |
0.02↓ |
0.020↓ |
0.08↓ |
|
φ50-80 |
±0.15 |
±0.10 |
0.05↓ |
0.025↓ |
0.10↓ |
6. STANDARD PACKING:Wooden case/carton
7. Trade Terms
1. Payment: 30% T/T in advance, 70% balance pay before delivery. L/C at sight.
2. Delivery time: 20 days after deposit receiverd. If opening mould, plus 7-10 days.
3. Trade Term can be chosen depending on your requirements.
4. FOB Port: Shanghai
Extrusion Tube For Electronical Parts
Extrusion Tube For Electronical Parts,Aluminium Alloy Extrusion Pipe,Aluminum Extruding Pipe,Aluminium Extruding Pipe
Changzhou YiFei Machinery Co., Ltd. , https://www.yifeialu.com