[ Huaqiang Security Network News ] 
Do you know the installation steps of Dahua network camera software? This article will explain to you. Generally, the network camera should be used with the NVR. Of course, it can also be replaced by a computer, but the stability is slightly worse.
The core part of the network camera is the switch. The switch should choose a better one. If the picture is cheap, there will be more services in the later stage. It is estimated that it is many times more than the switch you bought.
Dahua network camera software installation steps are divided into three steps:
1, hardware installation: take the switch as the center, the network camera, NVR, computer, etc., all network cables are connected to the switch.
2, software settings: If you use NVR, NVR can generally search IP, change IP; if you use a PC, you need a search IP software; if the NVR is stupid, will not search IP, then you have to lose IP.
3, routing switch settings: For a large number of systems, it is necessary to set up the routing switch, limit the flow, set the port and so on.
Suzhou Newstar Hardware Co.,Ltd. is committing to small Hand Tool Set, small hand Tool Set Box, small Hand Tool set case for more than 15 years. We could offer you best price on Tool Set case and tool trolley cabinet, and good quality reliable partnership for long term cooperation. We offered that you can trust, welcome to do business with us.
Small Hand Tool Set,Small Hand Tool Set Box,Small Hand Tool Set Case,Small Hand Tool Set Cabinet
SUZHOU NEWSTAR HARDWARE CO.,LTD. , https://www.hardwarenewstar.com