2. After the plaster is tiled, there must be no emptying of the whole tile (local hollowing can not exceed 20% of the entire tile). If there is an empty tile to be reworked, under normal circumstances, each tile is 100 tiles. Wall tiles allow 1 tile to be empty. Floor tiles allow 2 tiles to be empty, but must be reworked. Rework of the main material (which is already included in the loss) is the responsibility of the owner. If it exceeds this range, the owner Material is the responsibility of the construction party.
3. Under normal circumstances, the levelness of the floor tiles is allowed to have an error of 2 mm, the gaps of the floor tiles must be the same, the corners of the bricks and bricks should be leveled (0.5 mm error is allowed), and the bricks and bricks of the kitchen and bathroom wall tiles are The corners should be flat, but also need to be level (allowing 1mm error) and verticality (allowing 2mm error) to be achieved. For toilets and balconies, the floor tiles need to consider the floor drain, then the slope should be put first. If there is no special reason, there must be no Water.
4. After the wall tiles and floor tiles are finished, the slurry must be filled with joints or white cement.
Tiles Tiles Tiles Tiles Tiles Tiles Tiles Tiles Tiles Tiles Tiles Tiles Tiles Tiles

Six strokes teach you to buy high-quality mosaic

How are ceramic tiles classified?

With the continuous development of society and the improvement of people’s quality of life, there are more and more bathroom tile brands and materials on the market today. With many choices, consumers will be trapped. How to choose bathroom tiles will become One of the topics that consumers are concerned with and discussed. Next, we will introduce the selection of bathroom tiles.
Wall decoration usually occurs when empty wall tiles, in fact, in addition to hollow drum wall there are many construction needs attention to quality.
Identify the pros and cons of ceramic tiles: 1. The glaze should be smooth and delicate; 2. Put a few ceramic tiles together and look closely under the light. The color difference of a good product is very small, and the hue between the products is basically the same; Product color difference is large, the shades of the products are not the same; 3. The color and color of the tile are clear and natural, indicating that the degree of porcelain is high, the color is not clear, and the degree of porcelain is low; 4. The color pattern should be delicate and realistic. There are no obvious defects such as lack of color, disconnection, dislocation, etc. 5. In...

For every decoration owner, anyone wants to buy quality tiles. However, due to the less attention to ceramic tiles, it is often impossible to choose from a wide variety of tiles. Five more scientific methods allow you to pick a good tile.

Bathrooms are usually laid with tiles, and the choice of tiles is also very particular. The selection of tiles depends on whether the production process is good or not. Before buying, check whether there is a factory name, site name, product name, rating, number of grids, equivalent, trademark, date of production, and standards implemented on the product packaging box.
submit
Let Street Light,Spot Lights Outdoor,Outdoor Garden Lighting,Waterproof Led Light
JIANGMEN MICHEN LIGHTING CO.,LTD , https://www.jmmission.com