Heat-conducting oil pump in the use of the need to pay attention to many and many ways, in different industries and fields play an important role and value, but in the use of the need to ensure adequate use of preparation and requirements, in accordance with the normal way and principle. Heat transfer oil pump structural features: Heat transfer oil pump with self-heating cooling structure, changing the traditional water-cooled structure, so that the structure is simple, small size, saving running costs, good performance, reliable use, is our digestion and absorption of foreign oil pump developed on the basis of The second generation of products, the basic structure of the single-stage single-suction cantilever foot support structure, the pump inlet for the axial suction, the outlet for the center vertical upward, and the same motor mounted on the base. Heat transfer oil pump because of its variable delivery, self-priming ability, reversible, capable of conveying liquids containing solid particles and other characteristics in the sewage treatment plant, is widely used in conveying water, wet sludge and flocculant liquid . Screw pump selection should follow the economic, reasonable and reliable principles. If the design selection of ill-considered, will give future use, management, maintenance trouble, so choose a production according to actual needs, reasonable and reliable screw pump can ensure the smooth production, but also reduce repair costs. Heat-conducting oil pump seal features: Imported PTFE (referred to as PTFE) to do lip seals, the sealing performance has been a leap forward than the rubber seal reliability increased by 25 times, strong corrosion resistance. The combination of packing seal and mechanical seal, packing seal with high temperature filler, has good thermal adaptability, and mechanical seal is the use of high mechanical strength, good wear resistance of cemented carbide materials to ensure that the high temperature Under the sealing performance. Heat transfer oil pump speed selection Heat transfer oil pump flow and speed into a linear relationship, relative to low-speed heat transfer oil pump, multi-stage pump high-speed screw pump can increase the flow and lift, but significantly increased power, high speed accelerated rotor With the stator wear, the screw will inevitably lead to failure, and high-speed heat transfer oil pump stator length is very short, easy to wear, thus shortening the life of the heat transfer oil pump. Through the speed reducer or stepless speed regulating mechanism to reduce the speed, the speed maintained at a reasonable range of three hundred revolutions per minute, and high-speed operation of the heat pump, the service life can be extended several times.
Atv Spare Parts,Motorcycle Rear Fork,Motorcycle Spare Parts
Simple Shower Room Co., Ltd. , http://www.chinaatvpart.com