Instructions:
1. Determine the installation location of the lamp, select the appropriate installation method, and press the lamp to the distance of the 220V power contact point, and prepare the corresponding length of the φ6~8mm three-core cable;
2. Open the back cover by pulling the two locks on the lamp holder. Pass one end of the prepared three-core cable through the inlet, and connect the live wire (L) to the “L†terminal. The neutral wire (N) is connected to the cover. On the “N†terminal, the ground wire (PE) is connected to the “PE†terminal. After the cable of the inlet is pressed with the compression nut, the back cover is closed, the latch is fastened, and finally the three-core cable is connected. The other end is turned on to achieve lighting.
3. When replacing the bulb, open the rear cover according to the method of use. 2. Turn the lamp holder clockwise and gently pull it out of the lamp cover. Unscrew the old lamp on the lamp holder and replace it with a new one.
4, installation:
Ceiling Mounting: First use four M8 bolts to fix the lifting adapter plate to the lamp. Connect the three-core cable through the G3/4 pipe thread opening, through the round hole on the side and the introduction port on the lamp holder side. On the luminaire, the G3/4 pipe thread of the luminaire is then screwed together with the wiring pipe with standard G3/4 pipe thread.
Ceiling installation: According to the installation hole size of the lamp, the corresponding bolt hole is to be installed at the position where the lamp is to be installed and fixed with the M8 bolt.
5, multiple lights in parallel.
Precautions:
1. When the light is transported, it should be installed in the equipped carton and be equipped with foam shock absorption.
2. When used, there is a certain temperature rise on the surface of the lamp, which is a normal phenomenon; the center temperature of the transparent part is relatively high and must not be touched.
3, when replacing the bulb, should use the same type, power bulb; if you change the bulb type or power, should replace the matching ballast.
CNFC9180 anti-glare floodlights are suitable for railways, electric power, metallurgy, petroleum and petrochemical and various plant areas, workshops, stations and large facilities, venues and other places.
Features:
Anti-glare function. The transparent parts adopt advanced lighting optics principle to optimize the design. The light is even and soft, no glare and no ghosting, which effectively prevents construction workers from producing discomfort and fatigue.
Energy efficiency. Anti-glare floodlights use gas discharge light source, high luminous efficiency, long life, life can be up to 30,000 hours; power factor is greater than 0.9, high luminous efficiency, good light transmission.
Shockproof function. Multiple seismic structures and integrated designs ensure long-term safety in high-frequency, multi-frequency vibration environments.
Applicable environment. The high-strength alloy shell is used for special surface spraying and sealing treatment. It can be used for a long time under high temperature and humidity and various corrosive and harsh environments.
Installation method. Seat-type, ceiling-mounted and ceiling-mounted, and other installation methods adapt to the lighting needs of different work sites. Electronic and mechanical dual protection, automatically cut off the power after opening the cover, increase the safety, stability and reliability of use and maintenance.
Stainless Steel (Stainless Steel) is referred to as acid-resistant stainless steel, resistance of air, steam, water and other weak corrosive medium or stainless steel having resistance as stainless steel; and the resistance to chemical corrosion medium (acid, alkali, salt and other chemical leaching pitting) corrosion of steel known as acid-resistant steel. As the two differences in the chemical composition of leaving their corrosion resistance is different from ordinary stainless steel general impatience chemical corrosion, and acid-resistant steel are generally of a stainless steel.
So now Stainless Steel Padlock with his unique quality, it won a lot of the market, particularly in Europe, is located in the cold zone countries.
About us
Shengping Safety Protection Locks Manufactur, create to set up in 1989, is an enterprise specialized in the manufacture of different kinds of locks. We have obtained quality system authentications as ISO9001-2000 International Quality Control System Attestation,and we have obtained self-operation export and import right etc. According to many years of producing and R&D experience, we produce locks more than 100 kinds of specification with different kinds of raw materials & styles. Moreover, we can do customized work as per clients`designs.
Bearing the sense of [quality gets victory", our products are popular in domestic market; and with the fame of our product`s [good quality and best prices", we have increased our export all over the world. Now our product lines are mainly for export.
We tightly hold the quality control system, follow the contract, and keep faith and valued mutual benefit. We sincerely welcome customers home and abroad and our craft brothers to develop and flourish the locks market.
Stainless Steel Padlock High Security Padlock
Stainless Steel Padlock,Security Stainless Steel Padlock,Circle Steel Padlock,Disc Stainless Steel Padlock
Shengping Safety Protection Locks Manufacturer , https://www.chinajiuzhou.com