If the dust collector cannot stop the work when the bag is changed, the separation of each room should be carried out offline, and then the compartment should be exchanged. The compartment to be isolated should be in the closed form, and the pulse valve does not work (in case of safety, Room pulse valve power supply blocking). When disassembling the bag, due to the small amount of negative pressure on the bag mouth, you should be extra vigilant not to drop the bag into the ash hopper.
The dust bag in the dust removal accessory is gradually worn out. The important reason for the wear is the grinding force of the dust, the deterioration of the filter material caused by the low temperature and the corrosion of the chemical substance. When the grinding force of the dust is strong, the wear of the bottom of the bag is the most serious. The increase in system capacity causes an increase in filtration rate and accelerates wear and tear.
When the bag of most departments is damaged, all the exchanges should be carried out (when the filter material is working for a long time, the fine dust accumulated in the filter layer will reduce the gas permeability, and when the air volume of the system is affected, it should be replaced if it is not damaged) It is best to change the bag when the dust collector is stopped. At this time, the cleaning controller should be closed, and the manhole door at the top should be opened to assemble the bag. When assembling, the bag cage should be taken out first, then the bag should be taken up. The spring ring is pinched into a concave shape, and the bag is pulled up. Before the new cloth bag is placed, the dust on the flower plate hole should be cleaned and the cloth bag should be placed.
The placement of dust-removing skeletons and cloth bags is the most vigilant and careful work in all resettlement, so it should be placed in the most outdated rows. When placing, the cloth bags must not collide with sharp objects and hooks. Even small scratches will make The life of the bag is greatly shortened. The essential point for placing the bag is to first put the bag into the bag room from the hole of the box flower plate, and then press the spring ring on the upper part of the bag mouth into a concave shape, put it into the flower hole plate of the box body, and then restore the spring ring to make the revival It is tightly pressed against the circumference of the flower hole, and finally the bag cage is quietly pulled out from the bag mouth until the cover on the upper part of the bag cage is pressed against the flower plate hole in the box body. In order to prevent the bag from being trampled, it is required to install a bag for each bag.
The dust collector cannot work with a damaged cloth bag, or it will speed up the scrapping of the dust collector. When the individual bag is damaged in a small area, the hole can be filled and reused with an old cloth bag or a new filter cloth of the same material. The method of filling the hole is to use the silicone rubber mixture for bonding, as long as the adhesive temperature and chemistry are utilized. Performance and process conditions can be adapted. Http://
Http://news.chinawj.com.cn
Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn
Product Description
Our company is the major company known for providing Plasma Cutting Equipment to the clients. This product is manufactured using high grade components and contemporary technology in compliance with defined market quality norms. Offered range is widely used for cutting mild steel, stainless steel, brass metal plates, aluminum and low alloy carbon plates.
Features:
- High performance
- Robust construction
- Hassle-free operation
Cutting
samples
Customer cases
Gantry plasma CNC Cutting Machine
Plasma Cutting Machine,Heavy Plasma Cnc Cutting Machine,Plasma Cutter,Full Auto Cnc Plsama Cutting Mchine
Buluoer Intelligent Technology Co., Ltd. , https://www.buluoercuttingmachine.com