1. Check the filter or air filter of the air inlet end of the diaphragm pump for impurities.
2. Check if the diaphragm pump air valve is stuck with the cleaning fluid cleaning valve.
3. Check if the diaphragm pump air valve is worn and replace it with new parts if necessary.
4. Check the condition of the sealing parts of the center of the diaphragm pump. If the wear is severe, the sealing effect will not be achieved, and the air will be discharged from the air outlet end. Please use only the GLYD ring due to its special construction.
5. Check if the piston activity in the diaphragm pump air valve is normal.
6. Check the type of diaphragm pump lubricant. If the added lubricant is higher than the recommended viscosity, the piston may get stuck or operate abnormally. It is recommended to use a light and anti-freezing lubricant. (ISO grade 15/5WT resistance Frozen oil)
The pneumatic diaphragm pump has action, but the flow is small or there is no liquid at all:
1. Check the cavitation of the pneumatic diaphragm pump to reduce the speed of the pump and let the liquid enter the liquid chamber.
2. Check if the valve ball is stuck. If the operating liquid is incompatible with the elastomer of the pump, the elastic body will expand. Please replace the elastomer with the appropriate material.
3. Check if the joint of the inlet of the pneumatic diaphragm pump is completely locked and not leaking, especially the clamp near the inlet end ball needs to be locked.
Article from: http://NewsDetail280T1.html China Hardware Business Network http://news.chinawj.com.cn Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn
1. Product introduction
Powdered Activated Carbon with high quality Anthracite as raw material, its appearance is black powder or micro particles. After high temperature steam activation, to form the developed internal pore structure; it has large surface area and strong adsorption ability.It has good adsorption ability for the waste incineration that produce dioxin pollution in waste incineration power generation. This product is widely used in the field of solid waste incineration. It also widely used in wine, beverage, medicine, sewage treatment, power plants, waste incineration, electroplating and other fields.
2. Application
Powdered activated carbon widely used in adsorption dioxins, benzene and other complex gas that produce in the waste incineration. It has not the second pollution, low operation cost, good treatment effect, which can achieve a good purification purpose. The city garbage incineration plant is suitable for purifying combustion gas; the crematorium tail to purify containing sulfide gas. It also applied to high-end air purification, water treatment, wastewater treatment, desulfurization and denitrification, and effectively remove impurities and contaminants in the gas, and liquid and gas separation and purification; also can be widely used for the adsorption recovery of various substances with low boiling point, deodorized oil and so on.
3. Transportation and Packing
Woven bag, lined with plastic film bags, each 20kg can also be packaged according to customers demand, the product should be placed in a cool and dry place in storage. When transportation, the product should prevent from mixing with hard material, prevent breakage, leakage or mixed with debris that affecting the quality. Far away water soaking, oil and fire.
Powdered Waste Incineration Activated Carbon
Coal-Based Columnar Gas Activated Carbon,Coal-Based Column Solvent Activated Carbon,Coal-Based Column Carrier Activated Carbon,Coal-Based Column Psa Activated Carbon
Ningxia YiFeng RuiDa Activated Carbon Co.,LTD , https://www.nxyfrdhxt.com