From April 12 to 13, 2010, the seminar on the application of domestic CNC machine tools in the military industry and energy equipment field was held in Nanjing, Jiangsu Province. The meeting was hosted by the National Development and Reform Commission, the Ministry of Industry and Information Technology, the National Energy Administration, the National Defense Science and Technology Industry Bureau, and the China Machine Tool Industry Association and the China Peaceful Use of Military Technology Association. The purpose of the meeting is to deepen the long-term cooperation mechanism between the machine tool industry and the military industry, initially establish a long-term cooperation mechanism between the energy equipment field and the machine tool industry, promote the adjustment of industrial structure and economic development mode, and promote the development and technological progress of the domestic CNC machine tool industry. Promote the numerical control and autonomy of national defense science and technology industrial equipment and national energy equipment, and promote coordinated development between industries.
The conference commended 17 excellent cooperation projects for domestic CNC machine tools in the field of military and energy equipment (attached to the project list). Wu Bolin, executive vice president of the Machine Tool Association, informed the operation of the machine tool industry, released the 2010 edition of the "Recommended Product Catalogue of Domestic CNC Machine Tools", and compiled information on 1139 domestic CNC machine tools of 124 machine tool companies for military and energy equipment companies. Use. Shi Jinwu, secretary general of the Military Industry Association, introduced the situation of using domestic CNC machine tools for military construction projects, and released the fifth batch of "High-end CNC Machine Tool Demand Guide for Military Industry", involving 65 kinds of high-end CNC machine tools. Through the release of opinions and management methods, the machine tool industry and the energy equipment industry have initially established a supply and demand docking, quality commitment and tracking service system. During the meeting, the company organized military and energy equipment companies to visit the 6th China CNC Machine Tool Exhibition (CCMT2010), which enhanced the participants' perception of the strength and level of China's machine tool enterprises.
At the meeting, Zhang Xiangmu, Director of the Equipment Industry Department of the Ministry of Industry and Information Technology, Li Ye, Director of the Energy Conservation and Technology Equipment Department of the National Energy Administration, and Long Hongshan, Deputy Director of the Development Planning Department of the National Defense Science and Technology Industry Bureau, gave speeches. It has developed into a full affirmation and high evaluation of the form and effect of the symposium organized by the four ministries and the two associations. It believes that the government-led, industry associations, market operations, and long-term cooperation mechanisms for enterprise supply and demand coordination promote inter-industry coordination. It is of great significance to develop and strengthen China's economic strength and national defense strength. He said that the next step should continue to support cooperation and innovation among industries, and guide and encourage policies, funds, planning, major projects, demonstration projects, and management methods.
Comrade Zhou Jianping, director of the National Economic Mobilization Office of the National Development and Reform Commission, summarized the meeting. He stressed that it is necessary to further summarize, consolidate and promote the experience and practices of establishing long-term cooperation mechanisms between industries, give full play to the effective pulling of military and energy equipment needs, the efforts of the machine tool industry, the guidance of government departments and policies, and the construction of long-term cooperation systems. The enthusiasm and role. Co-development should be strengthened between industries and upstream and downstream industry chains. It is necessary to strengthen the capacity building of independent innovation and strengthen the combination of production, education and research. Some major projects and projects should be planned early and included in the “Twelfth Five-Year Planâ€.
In his speech, Director Zhou Jianping also put forward specific requirements for machine tool enterprises, industry associations and relevant government departments on the next step: machine tool enterprises should enhance service awareness, and provide a complete set of products and lines for users by providing a single product to the society. The transformation of products will eventually become a supplier of complete solutions; to develop proprietary technologies based on the optimization of key unit technologies; to develop high-speed, high-precision, high-efficiency and relatively low-cost products as high-end CNC machine tools companies Always strive to adhere to the direction; to establish an environmental protection concept of energy conservation and emission reduction, focusing on rapid restructuring and recycling, and using low-carbon technology, strive to provide users with green, low-energy, pollution-free or less polluting process equipment.
Industry associations should gradually standardize the methods of project management and establish a system for tracking, supervising and servicing the entire project. Guide both parties to make full use of the country's existing policies, including major science and technology projects, demonstration projects and technological transformation.
Relevant government departments should further formulate and improve supporting policies that encourage cooperation and encourage innovation according to the cooperation situation, and play a guiding role in policy.
The conference commended 17 excellent cooperation projects for domestic CNC machine tools in the field of military and energy equipment (attached to the project list). Wu Bolin, executive vice president of the Machine Tool Association, informed the operation of the machine tool industry, released the 2010 edition of the "Recommended Product Catalogue of Domestic CNC Machine Tools", and compiled information on 1139 domestic CNC machine tools of 124 machine tool companies for military and energy equipment companies. Use. Shi Jinwu, secretary general of the Military Industry Association, introduced the situation of using domestic CNC machine tools for military construction projects, and released the fifth batch of "High-end CNC Machine Tool Demand Guide for Military Industry", involving 65 kinds of high-end CNC machine tools. Through the release of opinions and management methods, the machine tool industry and the energy equipment industry have initially established a supply and demand docking, quality commitment and tracking service system. During the meeting, the company organized military and energy equipment companies to visit the 6th China CNC Machine Tool Exhibition (CCMT2010), which enhanced the participants' perception of the strength and level of China's machine tool enterprises.
At the meeting, Zhang Xiangmu, Director of the Equipment Industry Department of the Ministry of Industry and Information Technology, Li Ye, Director of the Energy Conservation and Technology Equipment Department of the National Energy Administration, and Long Hongshan, Deputy Director of the Development Planning Department of the National Defense Science and Technology Industry Bureau, gave speeches. It has developed into a full affirmation and high evaluation of the form and effect of the symposium organized by the four ministries and the two associations. It believes that the government-led, industry associations, market operations, and long-term cooperation mechanisms for enterprise supply and demand coordination promote inter-industry coordination. It is of great significance to develop and strengthen China's economic strength and national defense strength. He said that the next step should continue to support cooperation and innovation among industries, and guide and encourage policies, funds, planning, major projects, demonstration projects, and management methods.
Comrade Zhou Jianping, director of the National Economic Mobilization Office of the National Development and Reform Commission, summarized the meeting. He stressed that it is necessary to further summarize, consolidate and promote the experience and practices of establishing long-term cooperation mechanisms between industries, give full play to the effective pulling of military and energy equipment needs, the efforts of the machine tool industry, the guidance of government departments and policies, and the construction of long-term cooperation systems. The enthusiasm and role. Co-development should be strengthened between industries and upstream and downstream industry chains. It is necessary to strengthen the capacity building of independent innovation and strengthen the combination of production, education and research. Some major projects and projects should be planned early and included in the “Twelfth Five-Year Planâ€.
In his speech, Director Zhou Jianping also put forward specific requirements for machine tool enterprises, industry associations and relevant government departments on the next step: machine tool enterprises should enhance service awareness, and provide a complete set of products and lines for users by providing a single product to the society. The transformation of products will eventually become a supplier of complete solutions; to develop proprietary technologies based on the optimization of key unit technologies; to develop high-speed, high-precision, high-efficiency and relatively low-cost products as high-end CNC machine tools companies Always strive to adhere to the direction; to establish an environmental protection concept of energy conservation and emission reduction, focusing on rapid restructuring and recycling, and using low-carbon technology, strive to provide users with green, low-energy, pollution-free or less polluting process equipment.
Industry associations should gradually standardize the methods of project management and establish a system for tracking, supervising and servicing the entire project. Guide both parties to make full use of the country's existing policies, including major science and technology projects, demonstration projects and technological transformation.
Relevant government departments should further formulate and improve supporting policies that encourage cooperation and encourage innovation according to the cooperation situation, and play a guiding role in policy.
Diamond hand polishing and grinding pads manufactured using diamond flexible material for use on edges, corners and flat surfaces of a wide range of materials such as granite, marble, engineered stones, glass, ceramics, composites and hard metals. are used for polishing, grinding, restoring/cleaning areas hard to reach by polishing tools like wet grinder polisher, angle grinder etc. A useful and handy diamond tool to polish corners, contoured surface like sink, join of two bullnose surface for Granite polishing, Concrete polishing, Marble polishing, Terrazzo polishing, Travertine polishing, glass polishing and their restoration etc. These diamond tools may be used for floor polishing, counter top polishing, stone sculpture polishing etc. It could be useful and cost saver for small polishing project. Hand polishing could be time consuming over polishing using tools like grinders etc.
Hand Pads - Standard
80x50mm, 90 x 55mm and 120 x 60mm
Metal Grades Resin Grades
-60-1200 grit - 800-12000 grit
Metal Grades Resin Grades
-60-1200 grit - 800-12000 grit
hand polishing pads,Diamond Hand Pads,Diamond Hand Polishing and Grinding Pads,Diamond Hand Polishing Pads,Plated - Hand Pads - Hand Grinding,Flexible Diamond Hand Lap,Iamond Polishing Pads
Hans Superabrasive Material Co., Ltd. , https://www.hansuperabrasive.com