Paving the tile floor, if the loss is large, the owner's loss is not small. Many owners worry that the loss of ceramic tiles and floors is too large, but which is the normal loss, which is the malicious loss, what should pay attention to in the paving process of tiles and floors to make the home decoration not cost, and the heart is comfortable? First understand that the loss is inevitable during the construction process, to reduce the abnormal loss from the entire process link.

Accept normal loss

Losses are inevitable during the paving of tiles and floors. Huang Xiangling explained that because the size of the room does not match the size of the tile, it is necessary to cut the tile. If the tile is cut, it will cause loss. According to reports, in general, the overall loss rate of ceramic tiles is between 5% and 10%. “The owner must first objectively accept the concept of normal loss, because this is the inevitable construction.”

The normal loss is caused by several reasons: the size of the house and the size of the tile detachment do not match. For example, Huang Xiangling said that if the house is 3.65 meters wide, then the 600×600 mm tile is just right, but if it is a 4 meter wide house, the remaining 20 cm of the tile will have to be cut off, causing loss. In addition, the larger the size of the tile selected, the more the loss. If it is 800×800 mm, 1200×1200 mm tiles, the cut tiles will be more worn out, and the loss will be more than 10%.

According to the national standard of ceramic tile factory, there will be color difference, thin thickness, unsquared and slid skin. Even a batch of qualified ceramic tiles will have unqualified products. The tiles purchased by the owners are more or less Some unqualified products. In the construction, cutting the tiles will also have the difference, that is, the existence of normal mistakes. According to reason, in general, the loss of 2 tiles in 100 tiles is within the normal range. These losses are normal.

Related to this, Wang Qingqiang said that the normal loss of the floor is 5%, and its loss is also related to many factors, such as the shape of the house. If there are many corners and arcs in the house, the loss is relatively large; the smaller the room, the greater the loss; Very square or the size of the house is matched with the size of the floor, the loss is relatively small; in addition, the technical proficiency of the workers will also have a certain impact on the loss, the skilled workers will probably measure the house, and calculate how to shop.

Pay attention to abnormal loss

Oil Casing

The steel grades of common oilfield API-5CT Casing Pipe include J55,K55,N80-1,N80Q and P110.Casing pipe is mostly used for oil well drilling.In accordance with API-5CT and ISO11960 standard,pipes can be classified as STC(short thread),LTC(long thread) and BTC(buttress thread) accompanied with their couplings.

Oilfield Casing Pipes are positioned into well bore and cemented in place to secure both subsurface formations and the wellbore from collapsing,also to enable drilling mud to circulate and extraction to take place.

Dimensions And Weight

If you have any questions, please contact with us directly and welcome you can visit our Factory.

Oil Casing

Casing And Tubing,Oil Casing,N80 Casing,9 5/8 Casing Pipe

HEBEI CHENGYUAN PIPE INDUSTRY GROUP CO.,LTD , https://www.hbcytube.com