Weihong's control system uses TYPE3 path to cause the engraving machine spindle not to rotate

What is Type3? It is a French three-dimensional relief software, conversion speed, relief effect is good. During the engraving process, the path is usually done in TYPE3, exported and imported from Weihong system. However, there is a time when Weihong's system uses TYPE3 to make a good path. As a result, the spindle will not turn when the engraving machine cuts. Everything else is normal. What should we do? Can analyze from the following aspects:

1. Set the problem 1) First idle to ensure that the motor can operate normally;
2) If you have any knowledge of the G and M codes, in the column on the right-hand side of Weihong control, is there any M03 at the beginning (the spindle rotates clockwise to start, in the Weihong control system, after the start of the motor Weihong control It will automatically rotate the spindle motor) and end the segment M05 (spindle stop rotation). Check if there is an M in the middle of your cutting code. Personally think that it is still more likely to have problems with software settings and software operations.

2, the motor burned you manually open the spindle to see if not turn, if you do not turn is the problem of the machine. If you turn, you can select spindle rotation and stop in the settings.

3, refer to the inverter manual, check the inverter display parameters.

4, if it does not work, please come after the after-sales service personnel of the machine manufacturer, will reinstall Weihong card system, generally can solve the problem.

Product Introduction

PAC series products are of different degree of polymerization of the composition of inorganic polymers, which is mainly composed of Al13O4(OH)24(H2O)127 plus highly charged polymer chain polymerization of aluminum ions and colloidal particles in water with high efficiency and power in and bridging flocculation function, can effectively remove the water turbidity, color, heavy metals and trace organic compounds. Similar to DBNPA 2,2 Dibromo 3 Nitrilopropionamide, TTA Tolyltriazole , Isothiazolinones Bactericide and PAM Polyacrylamide FlocculantPolyaluminum Chloride PAC is also a kind of  Water Treatment Chemical .


Features:

 1, Forming fast activity is good, filter is good; 
 2, No added alkaline additives, such as the case of deliquescence, the results remain unchanged; 
 3, Suitable PH value of wide, strong adaptability and wide range of uses; 
 4, Treated water, less salt; 
 5, To remove heavy metals and radioactive substances to water pollution; 
 6, Active ingredients, ease of storage and transport. 

 

Specifications

Name

coagulant

Model

content of 30%

(Al203) content

30%

Color

yellow powder

Application

Water Purification

Certification

SGS

Size

0.5-1mm

PH(1% water solution)

3.8

Water insoluble matter%/≤

1

Ammonia nitrogen (N) content%≤

0.01

Arsenic (As) content%

0.002

Lead (Pb) content%

0.001

Cadmium (Cd) content%

0.002


Package: 25kgs bags or 1MT jumbo bags or made to order.


Polyaluminum Chloride PAC

Polyaluminum Chloride Pac

Polyaluminum Chloride,Polyaluminum Chloride Pac,Water Treatment Chemicals,Water Treatment

Zhengzhou Chorus Commerce & Trade Co.,Ltd , https://www.cn-lubricantadditive.com