The center is an aluminum hexagonal honeycomb with a low density (about 3 to 7 kg per square meter), which is 1/5 of the same thickness of the same board, 1/6 of the glass, 1/7 of the aluminum, and greatly reduced. Construction load and cost, because the middle interlayer contains a lot of air, it can be soundproof (air insulation up to 30dB), heat insulation (thermal resistance up to 0.02 (m2 · K / W)), no combustible materials, fire rating up to B1, Waterproof, moisture-proof, and no harmful gas release, the specific strength per unit mass is high, the specific stiffness is high (the structural rigidity is 1.7 times that of the rib type), and it is not easy to be deformed, completely overcoming the deformation and intermediate collapse of other decorative panels when the single-block area is large. The disadvantages of processing are convenient, and the hem can be cut arbitrarily. The surface fluorocarbon coating can guarantee the product life of more than 30 years. The surface of the aluminum honeycomb panel has extremely high flatness and good seismic performance. It is only eight points of the proportion of the glass curtain wall. One; 22mm thick standard parts can reach 700 kg or more when the load is 1 m and the deflection is 10 mm.
The surface is treated with a highly resistant fluorocarbon resin, which makes it widely used in the decoration of the building's curtain wall, roof, large facade signs and interior walls. The aluminum panels on the front side of the aluminum honeycomb panel are made of PVDF fluorocarbon paint in accordance with ECCA quality standards and are divided into normal color and metallic color. Therefore, the surface also has excellent weather resistance. Innovations that follow natural products often imitate the structure and form of nature, and human inventions are inspired by nature and adapted to the requirements of nature. Aluminum honeycomb panels have been widely used in building exterior wall decoration because of their advantages of light weight, high strength and high rigidity. The honeycomb sandwich panel with the same stiffness weighs only 1/5 of the aluminum plate and 1/10 of the steel plate.
The total thickness is 15mm, the panel is 1.0mm, the bottom plate is 0.8mm aluminum honeycomb panel, and the weight is only 6kg/m2. The interconnected honeycomb core is like a myriad of I-beams. The core layer is fixed in the entire surface of the board. It is not easy to produce shear, which makes the plate more stable, more resistant to bending and compression. Its wind pressure greatly exceeds that of aluminum. Plate and aluminum veneer, and has the characteristics of not easy to deform and flatness. Even if the size of the honeycomb plate is large, it can achieve extremely high straightness. The honeycomb core in the honeycomb composite plate is divided into a plurality of closed cells to prevent The air flows, so that heat and sound waves are greatly hindered, so it has the effect of heat insulation, heat preservation and sound insulation. The sound source for the 100 -3200HZ can reach 20~30dB, and the thermal conductivity is 0.104-0.130W/MK. Therefore, the energy absorption capacity of the aluminum honeycomb panel is 150-3500KJ / M2, which is an ideal energy-saving material.
In the event of heavy rain, the noise is particularly loud when hitting an aluminum veneer or aluminum-plastic panel, and the honeycomb panel avoids this. Aluminum honeycomb panels generally use fluorocarbon roll-coated aluminum panels as panels. The most important point of the fluorocarbon roll-coated aluminum plate is the continuous roll coating process. The aluminum plate is painted in one time, ensuring that the product has no color difference, good coating smoothness and reliable quality. At the same time, the exterior wall of the building can be kept bright for a long time. After long-term sun and rain or industrial waste gas pollution, it is obvious that the roll-coated board is brighter and brighter than the sprayed board, and has good adhesion and weather resistance. It is recognized as the first-rate material by the world's construction professionals.
Fiber optic waterfall lighting is a new creative lighting.It is un-replaceable because of its special design and lighting effect.
It is widely used in hotel, night club,wedding,bar, entertainment center and home decoration etc.
Sparkle Fiber Optic,it is processed from plastic bare fiber optic,widely used at Led fiber optic curtain, fiber optic chandelier, and something other place
Fiber Optic Waterfall,Fibre Optic Waterfall,Led Fiber Optic Curtain,Fiber Optic Wall
Jiangxi Daishing POF Co.,Ltd , https://www.jxopticfibrelight.com