1. The use of a lifting platform must be configured by professional operators who have undergone special training, examinations, and certification.
2. The lifting platform operator must start the lifting platform after carrying out various inspections and maintenance in accordance with the maintenance requirements of the machinery and equipment. Before the work, the working range of the lifting platform vehicle should be inspected and obstacles that hinder the rotation and walking of the lifting platform vehicle should be removed.
3. The support is an important preparation for the operation of the lifting platform. The flat surface should be selected. If the foundation is soft or undulating, it must be solidified with a sleeper before working.
4. The electric lift platform should generally start with the lower arm, then the middle arm, and finally the upper arm. During the slewing operation of the lifting platform, the slewing must be performed after raising the lower arm to a certain height, the slewing should be slow, and at the same time, whether the distance between the shearing arm and the platform for each device meets the safety needs is taken into consideration.
5. The operator on the working platform should wear a safety belt. When working in the electrified area, the body should be grounded according to the provisions. The lifting platform should be commanded by the person in charge of the work. The person in charge should follow the signal and lift according to GB5082. Platform operators contact. The signal sent must be clear and accurate.
6. Before the electric lifting platform is operated, the person in charge of the work shall give technical personnel and safety instructions to the operator. The contents shall include: the work content and requirements; safety precautions and danger points; the division of labor and the scope of responsibility. In addition to checking the condition of vehicles and operators, the person in charge of the work shall also be responsible for checking the topography and environment, and whether the take-off and landing meets the requirements of safety technical measures or the work plan previously worked out. If there is any difference, the relevant measures shall be worked out. start working.
7. If there is any conflict with the national or industrial regulations, this regulation shall be implemented according to national or industry regulations.
Here you can find the related products in flush valves. We are professional manufacturer of flush valves for toilet and urinal. We focused on international export, product development, production and marketing. We have improved quality control processes of flush valves to ensure each export qualified product.
If you want to know more about the products in flush valves, please click the product details to view parameters, models, pictures, prices and other information about self closing urinal flush valves, Automatic urinal flush valves, Manual toilet flush valves, foot-pedal toilet flush valves, Automatic toilet flush valves, custom flush valves.
Whatever you are a group or individual, we will do our best to provide you with accurate and comprehensive message about Flush valves!
Automatic Flush Valve,Manual Flush Valve,Flush Valves For Toilet,Water Closet Flush Valve
SHENZHEN KING OF SUN INDUSTRY CO.,LTD , https://www.handyfaucets.com