The process used to install and remove the pedal basket is always a matter of concern to us and it applies to the influence of the height of the pedal basket. It is a device that is large, so its dark disassembly process is complicated, so We need to concentrate, so today we will remove the key points:
In general, we should first eliminate the hammer on the foot pedal of the cable dismantling pedal basket and start the button to pull the wire from the hoist and safety lock. We must cut off the power supply and hang the rope at the location of the suspension mechanism. Remove the wire rope from the suspension mechanism and twist it into a 60cm diameter wire rope and. Remove the cable from the distribution box and unload the basket from the pedal of the box. Remember, the power cable is grounded, twisted into a 60cm diameter cord and. I hope the knowledge of these ankle baskets helps.
In general, we should first eliminate the hammer on the foot pedal of the cable dismantling pedal basket and start the button to pull the wire from the hoist and safety lock. We must cut off the power supply and hang the rope at the location of the suspension mechanism. Remove the wire rope from the suspension mechanism and twist it into a 60cm diameter wire rope and. Remove the cable from the distribution box and unload the basket from the pedal of the box. Remember, the power cable is grounded, twisted into a 60cm diameter cord and. I hope the knowledge of these ankle baskets helps.
WHEEL HUB ASSEMBLY,HUB BEARING ASSEMBLY,WHEEL HUB UNIT
SHAOXING ZHENGHONG AUTO PARTS CO.LTD , https://www.kontinental-bearing.com