The improvement of the development of the mold industry itself has led to the improvement of the technology of fastener molds. Fastener molds are an important part of industrial products, so the quality of fastener molds is very strict. With the advancement of technology, the demand for fastener mold technology is also increasing.
As China's economy enters a stable period, the industrial structure is gradually optimized, and the quality requirements for industrial products are getting higher and higher. This requires higher and higher fastener molds. It is expected that China's fastener molds will definitely develop in the high-end direction.
In recent years, with the rapid development of China's mold industry, the standardization, specialization and commercialization of mold parts have reached a high level and made significant progress. However, those products with high technical content, advanced structure, excellent performance, high quality, and convenient replacement are still lacking. Therefore, it is necessary to import a considerable number of fastener molds from abroad every year. Domestic fastener molds should be developed and broken in terms of technical standards, technology development, and product quality.
Most countries with developed industries pay more attention to the development of fasteners. Of course, they are inseparable from standard fastener molds. However, due to the late start of mold standardization in China, at present, China's fastener molds have long been characterized by small variety specifications, small production scale, unsmooth circulation, and low-to-medium-grade products. The high-end fastener molds produced by some foreign-funded enterprises are affected by their popularization and application due to their high price. For China's fastener mold enterprises, there is too little concentration, too many factories and too scattered, product quality can not keep up; for the fastener mold market, disorderly competition is more chaotic.
From the development plan of China's "10th Five-Year" mold industry, it is proposed that fastener molds should expand varieties, improve precision, and achieve interchange. Up to now, the "Twelfth Five-Year Plan", the development of China's fastener molds still can not keep up with the level of international developed countries. Many fastener molds have been used abroad for many years, and Chinese fastener companies have not yet produced them. At present, medium and high-grade fasteners are basically imported from abroad, and some products with low performance and poor stability are used for self-production and use on molds that are not required to be too high.
LED wash wall lamp, as the name implies, let the light like water wash the wall, mainly used for building decoration lighting, and also used to outline the large buildings.Since LED has the characteristics of energy saving, high luminous efficiency, rich color and long life, the washing wall lamp of other light sources is gradually replaced by LED washing wall lamp in 2013.
Product size
Technical parameters
1. Main material:High - pressure cast aluminum, high - light ultra - white tempered glass, back flame retardant ABS;
2. Surface treatment:UV Polyester powder coating;
3. The light body color:Dark grey;
4. Safeguard procedures:Silica gel ring compacted waterproof;
5. Average lifetime:350mA20000hours,500mA15000hours;
6. Control mode:CC/DMX512;
7. Operating ambient temperature:-25℃~50℃
8. The light colored temperature: Red/Green/Yellow/Amber/Vermilion/Acid blue/3000K/4000K/5000K/6000K
9. Light distribution device:Optical lens series:8°/15°/25°/45°/10×30°/10×60°/20×40°
10. Working voltage:DC24V
11. Way to install:Single U/Double U Adjustable Angle bracket
12. Level of protection:IP65
13. Working environment humidity:10%~90%
Led Wall Washer Lamp,Led Wall Washer Light Fixtures,Led Wall Washer Flood Light ,Led Wall Washer Light Products
Jiangsu chengxu Electric Group Co., Ltd , https://www.chengxulightings.com