Shenzhen Baowei Intelligent Technology Co., Ltd. is a high-tech enterprise with intelligent management products and services as its core. The company relies on the R&D, production, sales and service of parking lot management equipment, pedestrian access gate management equipment, intelligent door openers and other products to provide customers with integrated management solutions. Over the years, the company has specialized in three-roll gates, swing gates, wing gates, word gates, gates, barrier-free systems, access control, and parking lot systems. It has gradually improved the magnetic card, IC/ID card, barcode, and infrared series of products. The integrated use, through continuous struggle and hard work, has now become the industry's most powerful supplier of intelligent channel gate products.
First, the single pendulum situation:
1. Place the chassis in a fixed position so that the entire device is in an optimal state of installation.
2. Make a mark on the ground of the screw hole center of the base and the edge of the chassis base, remove the chassis, and use the drill to make a vertical hole on the screw hole that is well marked. The size and depth must meet the requirements of the expansion screw.
3. Move the device to its original position, insert the expansion screw and tighten the screw.
Second, double pendulum situation:
1. If two swing gates are used in conjunction with the machine, they should be debugged before fixing the chassis to prevent the chassis position from being adjusted during the debugging process.
2. First, power up the two swing gates, make the swing arm run to the closed state, and then align the swing arms of the two swing gates so that the swing arms are on the same straight line, and the distance between the swing arm and swing arm is 3CM to 5CM.
3, with the installation of infrared, but also need to test whether the infrared alignment, and other functions are all commissioned, and finally fixed chassis.
First, the single pendulum situation:
1. Place the chassis in a fixed position so that the entire device is in an optimal state of installation.
2. Make a mark on the ground of the screw hole center of the base and the edge of the chassis base, remove the chassis, and use the drill to make a vertical hole on the screw hole that is well marked. The size and depth must meet the requirements of the expansion screw.
3. Move the device to its original position, insert the expansion screw and tighten the screw.
Second, double pendulum situation:
1. If two swing gates are used in conjunction with the machine, they should be debugged before fixing the chassis to prevent the chassis position from being adjusted during the debugging process.
2. First, power up the two swing gates, make the swing arm run to the closed state, and then align the swing arms of the two swing gates so that the swing arms are on the same straight line, and the distance between the swing arm and swing arm is 3CM to 5CM.
3, with the installation of infrared, but also need to test whether the infrared alignment, and other functions are all commissioned, and finally fixed chassis.
Wintergreen oil naturally has a sweet and fresh scent and smell, very similar to that of peppermint oil, it has a wide variety of uses in foods, teas, aromatherapy, household and beauty products.
Wintergreen oil has been used as an active ingredient in many topical pain relievers for decades to help ease muscle joint and bone pain. For example, wintergreen is used as a natural headache remedy.
Wintergreen Essential Oil,Wintergreen Extract Essential Oil,Organic Wintergreen Essential Oil,Natural Wintergreen Essential Oil
Xinhui Gangzhou Flavors&Fragrance Co.,Ltd , https://www.xhgzff.com