First of all, do not arbitrarily modify the structure during design to avoid loose structure, wall or top collapse, resulting in unnecessary safety hazards. For example, the changed parts should be changed and fixed in strict accordance with the engineering standards.
Secondly, we must follow the simple decoration, do not pursue too complex and luxurious decoration effect. If the designer uses several layers of ceiling and full wall materials in the design drawings, it is best not to adopt them. There are also many glass ceilings and individual ceilings with visual effects, so it is best not to be easily involved. In order to pursue visual effects, some people prefer to use stone or other overweight materials indoors, which may make the load-bearing capacity of the house exceed the design standard. Even if you prefer to lay granite and marble, you should control the laying area as much as possible.
In the post-decoration, try to use the principle of less and fine. Some people like to use a lot of decorative products, from large to small, generally not recommended. Many people like to wear large chandeliers in the living room, which is very luxurious. However, the current floor slabs are generally thinner and have fewer steel bars. They are not suitable for installing heavy chandeliers. In addition, the large murals are not safe. It is best not to hang large and heavy paintings on the back of the sofa and on the walls of the bedroom, because no matter how fixed it is, the material will age and be unsafe. There are still a lot of small decorations, although it will not cause great danger, but if it is placed too high, it will be easy to cause damage if it falls.
Indoor furnishings should also pay attention to, if you like a certain style of furniture, pay attention to who should be used for the first time, there are old people and children at home, it is best not to choose the furniture with prominent angles. In order to unify the style, you can look at the suitable furniture before design, and then the designer can design the room style according to the furniture.
Marble decoration
Hidden danger: marble material falls off the wall
Hidden causes: directly glued to the wall and glued, the glue is easy to age, causing the marble to fall off the wall.
Correct handling
There are three ways to handle marble walls:
One is dry hanging. First fix it on the wall with bolts. Then slot a stone, fix the stone with a T-shaped frame, and then fix the T-frame and the bolt together. This marble wall has a certain distance from the wall itself, but the fixing is good.
The second is wet stickers. First make a layer of steel mesh on the wall, then use concrete wet stickers.
The third is to paste directly. Generally divided into point paste and face stickers. The surface sticking method is suitable for thin stone, the thickness is below 8mm, the weight is similar to that of wall tiles, and it can be pasted with special mortar. Point paste is made of stone special glue, the range of points can not be greater than 25CM, the amount of points can not be less than 3-4CM, the thickness of glue is above 0.5CM, this way is used for slightly thicker stone.
Direct paste is also very important for wall requirements. First, if there is putty on the concrete wall, the putty must be shoveled off and directly attached to the concrete wall. In addition, because the deformation of the light-weight wall is large, if the wall is deformed after the glue, the marble will also change, causing hidden dangers.
The direct paste method is not suitable for the bathroom, because the bathroom is mostly light-weight wall, the deformation is large, and the bathroom is often wet. For a long time, the glue is easy to age and easy to accident.
Concerned about surprises
Label: ceiling decoration needs to eliminate safety hazards
Previous: What are the performance characteristics of aluminum profiles? Next: How about the wall-mounted bathroom?
Mono Calcium Phosphate ,the chemical formula is Ca (H2PO4)2.H2O, molecular weight of the body is 252.06, after dryed the product is white or slightly yellow micro powder or granules, the relative density of 2.22 (16 °C). Slightly hygroscopic, soluble in hydrochloric acid, nitric acid, slightly soluble in cold water, almost insoluble in ethanol. At 30 °C, 100 ml of water soluble MCP 1.8g. The aqueous solution was acidic, heating the aqueous solution can get calcium hydrogen phosphate. Lose crystal water at 109 °C and decomposed into calcium metaphosphate at 203°C. Applications:Monocalcium Phosphate is used to supply mineral nutrition such as phosphorus (P) and calcium (Ca) for animal, which can be easily digested and absorbed. Extensively applied as additives of Phosphorous and Calcium in aquatic animals feed.Higher water solubility of MCP is required in aquatic animals feed.
Monocalcium Phosphate (MCP)
Monocalcium Phosphate,Mcp Feed Grade,Monocalcium Phosphate Powder,Monocalcium Phosphate Granular
MIDI FEED BIOTECH LIMITED , https://www.midifeed.com