The splitter is a work that can be controlled in a static hydraulic environment. The splitting process can be completed in a few seconds and it can work without interruption. Some considerations during use are as follows:
When the ripping point is set unreasonably, the phenomenon of unsuccessful splitting or incomplete splitting often occurs during on-site construction. After analysis, this is mainly caused by the unreasonable setting of splitting point. In order to achieve the desired effect, the texture and lithology of the rock should be analyzed and the cleave point should be reasonably distributed before the splitting to achieve the best splitting effect.
Drill pipe fracture in the process of drilling with core drill, drill pipe consumption is relatively large. The main reason is that the operator's operation is not proper, the drilling is not upright, the drill pipe is subjected to external force, resulting in fracture of the drill pipe. To avoid this phenomenon, the core drill operator must undergo post training before operation, learn to operate essentials, in particular to ensure that the drill The rods are kept perpendicular to the rock drilling surface and drilled in strict accordance with operational requirements.
Dust Hazard During the splitting process, dust is unavoidable and harmful to human health. Therefore, effective protective measures must be taken, and protective glasses, masks and special protective masks must be taken to minimize the harm to the human body caused by dust.
Cleavage efficiency is not high After many uses, accumulating more experience and accurately analyzing the texture and lithology of rock can double the cleaving efficiency of the rock. In addition, the rational allocation of the number of core drilling stations, to ensure the number of holes per day, provide sufficient number of holes for cracking, but also to speed up the rock splitting speed.
When the ripping point is set unreasonably, the phenomenon of unsuccessful splitting or incomplete splitting often occurs during on-site construction. After analysis, this is mainly caused by the unreasonable setting of splitting point. In order to achieve the desired effect, the texture and lithology of the rock should be analyzed and the cleave point should be reasonably distributed before the splitting to achieve the best splitting effect.
Drill pipe fracture in the process of drilling with core drill, drill pipe consumption is relatively large. The main reason is that the operator's operation is not proper, the drilling is not upright, the drill pipe is subjected to external force, resulting in fracture of the drill pipe. To avoid this phenomenon, the core drill operator must undergo post training before operation, learn to operate essentials, in particular to ensure that the drill The rods are kept perpendicular to the rock drilling surface and drilled in strict accordance with operational requirements.
Dust Hazard During the splitting process, dust is unavoidable and harmful to human health. Therefore, effective protective measures must be taken, and protective glasses, masks and special protective masks must be taken to minimize the harm to the human body caused by dust.
Cleavage efficiency is not high After many uses, accumulating more experience and accurately analyzing the texture and lithology of rock can double the cleaving efficiency of the rock. In addition, the rational allocation of the number of core drilling stations, to ensure the number of holes per day, provide sufficient number of holes for cracking, but also to speed up the rock splitting speed.
Excavator Buckets,Rock Buckets,Excavator Boom
Bucket Teeth Co., Ltd. , http://www.nsexcavatorparts.com