Any item at the time of installation has more or less relevant installation conditions to be prepared. For example, for a real stone paint decoration material, it is required to have a good construction environment when it is successfully built, because the real stone paint itself has special features. Due to its nature and ease of construction, there are many environmental requirements for real stone paint at the time of construction. Below, the author hereby gives you detailed information about the requirements of the environment when the real stone paint was successfully built.
Real stone paint construction equipment and requirements:
1. Air Compressor: The power is more than 5 horsepower, and the air volume is sufficient. At least three tracheals can be provided to meet the construction of more than three people at the same time.
2, under the pot spray gun: capacity 500ml, diameter 1.3mm or more, the capacity can not be too large, or too heavy, inconvenient to operate, small diameter, the construction speed is slow, may delay the construction period, not a large area of ​​construction.
3, real stone paint spray gun: sub-shots, double guns, three guns, etc., according to different colors choose single-color single gun, double-color, multi-color with two guns, three guns, in order to adapt to different construction processes, spray more ideal effect.
4, a variety of nozzle diameter: 4mm, 5mm, 6mm, 8mm, etc., according to the requirements of the model to choose a different nozzle, the smaller the aperture, the more uniform the spraying effect, the larger the aperture, the larger the flower, the stronger the convex and concave sense.
The base layer of real stone paint should be cleaned before spraying, no dust, rust, oil traces, no emptying, pulverization, peeling, sanding and other phenomena, the base surface should have a certain strength, moisture content <10, PH <9, dry grass When the cement mortar base requires more than 21 days, if the temperature is low, extend it appropriately. Middle layer of real stone paint: spray method, spraying pressure 0.5-1.0mPa/cm2, according to the requirements of the model to choose the right nozzle, the construction temperature above 10 °C, thickness 1-2mm, smear two, two hours apart, after drying for 24 hours Polished. Spray gun should be perpendicular to the surface to be painted, distance of about 60 cm.
Real stone paint construction equipment and requirements:
1. Air Compressor: The power is more than 5 horsepower, and the air volume is sufficient. At least three tracheals can be provided to meet the construction of more than three people at the same time.
2, under the pot spray gun: capacity 500ml, diameter 1.3mm or more, the capacity can not be too large, or too heavy, inconvenient to operate, small diameter, the construction speed is slow, may delay the construction period, not a large area of ​​construction.
3, real stone paint spray gun: sub-shots, double guns, three guns, etc., according to different colors choose single-color single gun, double-color, multi-color with two guns, three guns, in order to adapt to different construction processes, spray more ideal effect.
4, a variety of nozzle diameter: 4mm, 5mm, 6mm, 8mm, etc., according to the requirements of the model to choose a different nozzle, the smaller the aperture, the more uniform the spraying effect, the larger the aperture, the larger the flower, the stronger the convex and concave sense.
The base layer of real stone paint should be cleaned before spraying, no dust, rust, oil traces, no emptying, pulverization, peeling, sanding and other phenomena, the base surface should have a certain strength, moisture content <10, PH <9, dry grass When the cement mortar base requires more than 21 days, if the temperature is low, extend it appropriately. Middle layer of real stone paint: spray method, spraying pressure 0.5-1.0mPa/cm2, according to the requirements of the model to choose the right nozzle, the construction temperature above 10 °C, thickness 1-2mm, smear two, two hours apart, after drying for 24 hours Polished. Spray gun should be perpendicular to the surface to be painted, distance of about 60 cm.
Kitchen Cabinet Door,Cabinet Doors,Acrylic Kitchen Cabinet Door
UV Boards,Wardrobes Co., Ltd. , http://www.wall-board.com