When we were decorating the house, laying the floor was a very important part. In order to ensure that the paved tiles or wooden floors could be more exquisite, we needed to deal with the ground. So, how to deal with the flooring before laying it? This article will introduce everyone to the bottom floor floor cleaning steps.
How to deal with the floor before laying a floor : clean up the construction site
1, remove the putty and latex paint that fall on the ground
Many people always have lots of putty and latex paint on the floor during the renovation of the house. It is recommended that you buy some color strips on the floor when you are decorating so that when you remove the putty and latex paint, you will not So troublesome.
2, remove the putty residue at the intersection of the ground and the wall, and the loose part of the putty edge
Usually when we scrape the putty, the workers will only scrape it to a height of approximately the height of the baseboard from the ground. Therefore, the walls that are blocked by the baseboard are usually not putty. It is recommended that you ask for the wall surface treatment. The builder puts putty to the bottom of the wall.
3, clean the ground dust
If some small dust on the ground is difficult to remove, you can use a latex paint brush to brush all the wall edges. You can brush out the tiny dust on the wall and clean it.
4, use mop to clean the ground
Use a mop to clean the floor so that there is no fine dust on the floor.
5, ground cleaning
If the ground cleaning work is not done well, it will easily lead to unevenness when laying wooden floors or tiles, and arching will occur. When installing the floor, we need to wait until the ground is dry before laying.
6. Close the construction site before entering the wooden floor to prevent dust contamination
Then we need to seal the floor and wait for the floor to be laid. If we don't lay the floor for a long time, we need to remove the surface dust before laying the floor.
How to deal with the floor before laying the floor two: how to deal with different materials before laying
1, solid wood composite floor
When laying solid wood flooring, the cement floor should be leveled, and then the materials used should be calculated and some expansion joints should be reserved.
2, tile floor
Regardless of whether we use dry or wet tiles, we need to consider the proportion of cement and sand. When laying larger tiles, we need to have a certain amount of expansion gaps. We need to customize and install the door stone earlier.
3, solid wood flooring
When laying solid wood flooring, in addition to the leveling of the cement floor, it is necessary to fight the skeleton of the dragon, then pre-insert the insecticide, and then calculate the use of materials, set aside some expansion joints.
The article is summarized: The above is about how to deal with the flooring before the floor, how to deal with the relevant precautions, hoping to give everyone some help when laying the floor, let everyone know how to deal with the floor in front of the floor, so that everyone can lay the floor more beautiful .
PFALL , https://www.pfallfurniture.com