| Home>Bearing knowledge>Select the bearing clearance to pay attention to those |
Picking out the bearing clearance should pay attention to those
Source: Bearing network time: 2018-03-05
| /*250*250 was created on 2017/12/25*/ var cpro_id = 'u3171089'; |
1. Select tight cooperation; large temperature difference between inner and outer ring, demand conflict conflict torque and deep groove ball bearing accept large axial load or need to improve the function of centering; large clearance group should be used.
2. When the rotation precision demand is high or the axial displacement needs to be strictly restricted; a small clearance group should be selected.
Second, the elements related to the play:
1. Cooperation between bearing inner ring and shaft.
2. Cooperation between bearing outer ring and outer casing hole.
3. The effect of temperature.
Note: The reduction of radial clearance is related to the practice of cooperative parts, the size of the excess interference, the size of the shaft diameter, and the wall thickness of the shell hole.
1. The practical useful excess (inner circle) should be: â–³dy = 2/3â–³d CG* â–³d is the nominal interference; G* is the flattening scale of the interference cooperation.
2. The practical useful excess (outer ring) should be: â–³Dy = 2/3â–³DCG* â–³D is the nominal interference; G* is the flattening scale of the interference cooperation.
3. The heat generated will cause the internal temperature of the bearing to rise; then the swelling of the shaft, the bearing housing and the bearing parts will increase. The clearance can be increased or decreased. 馊 [鲇谥岷 å²¢ å²¢ å²¢ å²¢ 牟 牟 约 约 约 约 约 约 约 约 约 约 约Brother Сèƒè€ƒè€ƒæ¶žå¥ˆéœ²å¿ç”“.
Third, the calculation formula of the clearance:
(1): Impact of cooperation
1. Bearing inner ring and steel solid shaft: â–³j = â–³dy * d/h
2. Bearing inner ring and steel hollow shaft: â–³j = â–³dy * F(d)
F(d) = d/h * [(d/d1)2 -1]/[(d/d1)2 - (d/h)2]
3, bearing outer ring and steel solid shell: â–³ A = â–³ Dy * H / D
4. Bearing outer ring and steel thin-walled casing: â–³A = â–³Dy * F(D)
F(D) = H/D * [(F/D)2 - 1]/[(F/D)2 - (H/D)2]
5. Bearing outer ring and gray cast iron casing: â–³A = â–³Dy * [F(D) C 0.15 ]
6. Bearing outer ring and light metal casing: â–³A = â–³Dy * [F(D) C 0.25 ]
Note:
â–³j -- the amount of expansion of the inner ring raceway rib diameter (um).
â–³ dy journal has a useful interference (um).
d -- bearing inner diameter nominal scale (mm).
h -- inner ring raceway rib diameter (mm).
B -- bearing width (mm).
D1 -- hollow shaft inner diameter (mm).
â–³A -- the shortening of the diameter of the outer ring raceway rib (mm).
â–³Dy -- shell hole diameter practice useful interference (um).
H -- outer ring raceway rib diameter (mm).
D -- nominal diameter (mm) of bearing outer ring and housing bore.
F -- outer diameter of the housing housing (mm).
(2): Effect of temperature △T = Гb * [De * ( T0 C Ta ) C di * ( Ti C Ta)]
Гb is the linear expansion coefficient; bearing steel is 11.7 *10-6 mm/mm/ 0C
De is the bearing outer ring raceway diameter; di is the bearing inner ring raceway diameter.
Ta is the ambient temperature.
T0 is the bearing outer ring temperature; Ti bearing inner ring temperature.
Fourth, the relationship between axial clearance and radial clearance:
Ua = [4(fe + fi C 1) * Dw * Ur C Ur2 ] 1/2
Because the radial clearance Ur is small, Ur2 is very round.
So Ua = 2 * [(fe + fi C1) * Dw * Ur ] 1/2
In the meantime, fe is the curvature coefficient of the outer ring groove; fi is the curvature coefficient of the inner ring groove; Dw is the diameter of the steel ball.
Recommend to friends comments close window
| Bearing related knowledge |
| The characteristics of the spiral spring bearing are the high-speed angular touch ball bearing analysis and remanufacturing skills. The bearing of the bearing product is used in the bearing and the outer ring of the outer ring to calculate the smooth oil quantity and the oil supply method. |
This article links to http://
Please indicate China Bearing Network http://
Previous:The importance of imported bearings is smooth and the effect of imported bearings is smooth. The next section: The basic functional requirements of bearings in various categories
Holland Mesh Fence
* Using high quality iron rod as raw material, the welded panel or rolled fence, after Galvanization, PVC Powders dipped coating; it can resist the corrosive and ultraviolet radiation very strongly.
Selection of high-quality wire welded together, the PVC or PE, PP powder after curing the surface of the coating, with strong adhesion, corrosion resistance, bright color and so on.
Manufacturing process: steel wire after the plastic coating, but also a separate plating, hot-dip and plastic coating.
* Mushroom special Tubes (48*1.5mm) is designed refined and scientific, with plastic caps on the top of the post.
The finished surface usually is Galvanized and Powder coating, or alternatively. It usually uses installation method of burying additional 50 cm pass panels height into the earth. Special sizes can be provided as the client`s request.
* Euro fence has good anti-corrosion properties, anti-aging, elegant appearance. Easy to install Can be widely used in industrial, agricultural, municipal, transportation and other industries fence, decoration, protection and other facilities. With good filtering accuracy, high load strength, low cost.
Holland Mesh Fence,Welded Holland Fence,Wire Mesh Holland Fence,Holland Wire Mesh Fence
HeBei Bosen Metal Products Co.,Ltd , https://www.bosenfence.com