>>> Links: Moulding on the wall
1. Black areas: scrape off the marks, rub off the nodules, dry and repaint.
2. Paint drips and overflows: After the paint is dry, it is sanded, dusted and repainted.
3. Wrinkles: When the first layer of paint is applied, the second layer will produce wrinkles. It should be scraped and repainted.
4. Gravel: If the gravel is wrapped in dry paint, lightly grind it with sandpaper, sweep paint, wipe it dry and wipe it clean.
5. Starting up: Remove the original paint (if there is a gap, fill it first), make a base, paint the primer and then paint.
6, uneven coating: If you see the primer see, you can add a layer of paint.
7, flakes off: the surface is not treated well, should scrape off the original paint, look good on the surface, repaint.
8. Spots: Apply paint on the surface of aluminum and repaint it.
9, crack: If the two layers of paint are incompatible, it will produce cracks, scrape off the original paint recoating.
10, black spots: sanding and re-coating when dry, wipe the black spots and modified.
Wall construction paint
Seamless Steel Pipe is made from a solid round steel `billet` which is heated and pushed or pulled over a form until the steel is shaped into a hollow tube.
In Seamless Pipe, there are no welding or joints and is manufactured from solid round billets. The seamless pipe is finished to dimensional and wall thickness specifications in sizes from 1/8 inch to 26 inch OD. Applicable in for High-pressure applications such as Hydrocarbon Industries & Refineries, Oil & Gas Exploration & Drilling, Oil & Gas Transportation and Air and Hydraulic cylinders, Bearings, Boilers, Automobiles etc.
Seamless Steel Pipe
Seamless Steel Pipe ,Carbon Steel Seamless Pipe ,Seamless Pipe ,Carbon Seamless Steel Pipe
Cangzhou Zhongshun Steel Pipe Trade Co., Ltd. , http://www.china-steelpipes.com