The exquisite construction process is often reflected in some details. It is like installing switches, sockets and faucets on the walls of kitchen tiles. It looks as if they are inconspicuous, but it directly affects the beauty of the living room. Therefore, attention should be paid to the following matters during construction:
>>>Links: How to wire the telephone line, network cable, cable TV line?
1. Switch, socket can not be installed in the tile and waistline of the tile.
2. When the switch and socket bottom box are opened in the tile, the frame can not be more than 2mm larger than the bottom box, nor can it be opened into a round hole. In order to ensure the installation of switches and sockets at a later date, the bottom edge of the box should be flush with the tiles as far as possible so that no longer a longer screw can be found during installation.
3. Install the switch, socket position can not have more than two tiles are destroyed, and try to make it installed in the middle of the tile.
4. Open hole must be opened into a round hole, can not be opened into a square hole, and can not be opened into a "U" type, and then make a piece in the "U" hole, the size of the hole can not exceed 2mm diameter, And the outlet must also be flush with the tile.
Hydropower renovation switch socket faucet
Solar Charger,Fidget Spinner Co., Ltd. , http://www.chsolarcharger.com