In the treatment of the old house decoration wall , the wall surface largely determines the effect of renovation and renovation. Therefore, the decoration of the wall surface treatment is a link that the owner should attach great importance to. However, to remind owners of second-hand housing renovation, not all second-hand housing walls must be removed to re-do walls, such as some second-hand housing wall quality is not bad, there is no emptying, peeling, cracking these phenomena, to deal with "A bit dirty" problem, you can solve by "decoration", that is, re-painting, wallpapering these techniques. The following Xiao Bian will introduce the old house decoration wall surface treatment skills for everyone.
Old house decoration wall surface treatment skills, brush latex paint
This is the simplest and most common way to decorate walls. Usually second-hand housing surface treatment of the wall, leveling with putty, polished smooth, and then brush latex paint, latex paint is the mainstream of the current wall treatment. At the junction of the upper part and the top part, a plaster line is used to make the inside corner, and the lower part is connected to the ground with a skirting line. This process is simple and bright, the room is bright and spacious, but the lack of change. Can be decorated by hanging picture frames, photos, tapestries, etc. with spotlights. It must be reminded that many industrial coatings have more or less toxicity. Ventilation should be taken care of during construction. After construction, they must be volatilized at least for more than one week before they can stay in order to avoid harm to the health of the family.
Old house decoration wall surface treatment tips
After the wall surface is smoothed, apply wallpaper. There are many kinds of wallpapers. There are hundreds or even thousands of wallpapers. The colors and patterns are very rich. The wallpaper is dirty and easy to clean. New wallpapers can be wiped directly with a damp cloth. The old wallpaper can be used to peel off the surface. No need to deal with it. Simply attach a new wallpaper and it is very convenient. The most important key technology in the construction of wallpaper is the problem of mildew prevention and handling of stretchability:
(1) Treatment of mildew. Before the wallpaper is posted, it is necessary to treat the base surface first, and the flying powder and the cooked rubber powder may be used to perform batch heating and leveling. After it is dry, apply a varnish one or two times and post it again.
(2) Scalability treatment. The scalability of wallpaper is a chronic problem. To solve it is to start with prevention. On the one hand, we must reserve 0.5mm overlapping layers. There are some people who unilaterally pursue aesthetics and cancel this overlap. This is not appropriate. In addition, try to buy some good scalability wallpaper.
Old house decoration wall surface treatment tips
Tiles are currently a major item in the renovation. Most of the tiles are used in kitchens, toilets, balconies and other places. The biggest advantage of tile decoration may be dirt resistance. One of the main problems in tile decoration is the treatment of the waterproof layer. Because there are problems with water in most places in the kitchens and toilets. Therefore, the waterproof of the wall should be highly noted. New houses that are not waterproof or old houses that need to replace tiles need to be re-waterproofed.
The main method for the treatment of the water-repellent layer is: a suitable waterproof agent at a height of 1 meter on the ground and walls, such as a waterproof agent No. 911. The location of the wall above 1 meter can use a bit of asphalt oil for waterproofing.
If the economy is not allowed, you can also directly use asphalt or resin to waterproof the floor. The ground and the ground must be thick at a position of 20 cm. After the renovation, try to avoid drilling holes at a height of less than 1 meter.
Old house decoration wall surface treatment techniques Fourth, the wall base treatment
(1) The wall surface of an ordinary old house generally needs to be removed from the original paint surface. The technique is to wet the surface with water first, then use a trowel or an electric planer to remove the surface paint;
(2) For old, disrepaired walls, the surface has been severely flaking off, and the hot layer has been chalked. The lacquer layer and the entire batch must be removed by shoveling, until cement or hot bricks are seen;
(3) Then use double fly powder and cooked rubber powder mix and mix bottoming and batching, then paint latex paint. The surface layer needs to be coated 2 to 3 times. The interval between each pass is preferably 24 hours.
Editor's summary: About the old house decoration wall surface treatment skills are introduced here. For more information, you can follow this site information.
Tile adhesive kitchen tile balcony tile ld tile
Application of Polyester Shrink Cover Fabric
Polyester Shrink Cover Fabric will install on the Cylinder Mould to make toilet paper,tissue paper,writing paper,printing paper,etc.
The diameter of Cylinder Mould have 1.25m, 1.5m, 1.75m, 2.0m, 2.5m,
Range of Polyester Shrink Fabric from 10mesh to 100mesh as per different client`s demand.
Polyester Shrink Fabric
Polyester Shrink Fabric, Shrinking Polyester Mesh, Polyester Shrink Cover Fabric, Shrink Cover Fabric, Polyester Mesh, Paper Making Mould Cylinder Mesh
HUATAO GROUP LTD , https://www.huataogroup.com