The quality of the integrated ceiling aluminum buckle plate is not entirely thin and thick, but the key lies in the texture of the aluminum material. The general engineering aluminum buckle plate has 0.8 mm or even thicker. Why? Because some engineering gussets are very long, in order to prevent deformation, so use a little thicker, a little harder, on the contrary, home use aluminum gussets, rarely more than 4 meters, and there is no weight on the aluminum buckle ceiling Things, so, home improvement aluminum buckle, so to speak, 0.6 mm is enough. So, why did you come to the building material city, many salesmen said to you 0.8 mm, and some friends said that someone introduced him to 0.88 mm; that's because their boards are not working, so they can only take the thickness To come to Mongolia --- really destroy people tirelessly.
Clearly telling everyone that 0.6 mm is enough. Take the example of an imported brand aluminum buckle plate with a large reputation on the market, its price is more than 300 yuan per square meter, but what is its thickness? 0.5 mm, not as good as 0.6 mm! Why, the board is not good or bad, but the substrate. In fact, if the aluminum gusset you are consulting is brand name, most of them are 0.6mm in terms of mid-range.
Regarding why some brands are not good at 0.8mm, there are some miscellaneous brands that use aluminum for cans. Because of the quality of aluminum itself, they want to make aluminum buckles very thin but not possible. Because the aluminum is not good, the board can't pull thin evenly, so they can only do it in thick.
Therefore, to identify the aluminum buckle plate, in addition to paying attention to the surface finish, it is also necessary to observe whether the thickness of the plate is uniform or not.
Ceiling ceiling integrated ceiling
Waterproof Membrane,Dimple Geomembrane for Drainage,Impermeable Recycle Geomembrane
Waterproof Material,Geotextile,Geocell Co., Ltd. , http://www.nsgeotextiles.com