In a big city like Shanghai, there must be a lot of different factories, and there are also many companies specializing in the renovation of factories. For those who first renovated the factory, there are still many issues that are not well understood. Next, we will explain in detail what the Shanghai factory decoration focuses on, and the contents of the plant renovation waterway transformation steps. 
Shanghai plant decoration focus on what
First, effective space division
Then for the division of the spatial pattern in the factory, we have better be based on the needs of the operators and then allocate the space. If there are many equipments in the factory, then it is not appropriate to set too many partitions. Try to use the color tone of the ground or use some colored markings to divide the area. Use the logo to divide the area to avoid too much color. If the area is not clear, it will make people feel dizzy. Other factories can clearly define the equipment area and the office area. Such planning is now common because it is easy to manage.
Second, a reasonable top design
During the renovation of the factory building, we must pay special attention to the top surface of the room. The top of the general factory building will be relatively high, and many of the sites will be constructed using steel frameworks. At the top of the renovation, it is necessary to design reasonable arrangements for fire protection, ventilation, and central air conditioning, as these are the necessary hardware facilities for the renovation of the plant, especially fire protection. According to the requirements of use, the Hangzhou plant decoration company decided to determine whether or not the ceiling should be suspended. There are many materials for the ceiling of the nearby factory. If it is for beauty, it can be used to decorate the top with mineral wool sound-absorbing panels, plaster boards, and aluminum-plastic panels. 
Third, pay attention to the ground selection
In fact, we must pay attention to the problem of the floor. Usually, the floor of the surrounding factory buildings can not bear the load, so we can consider using some inexpensive decorative materials. Such as floor tiles or composite wood floors to do the plant floor decoration materials, and some plants to consider when anti-static decoration, then we must choose anti-static flooring, or anti-epoxy floor, etc., as the preferred material for the plant decoration floor. In addition, when the plant needs to be loaded with ground loading, it must be concrete on the ground floor. The concrete is divided into commercial concrete and soil. The former has a slightly higher cost but has a stable quality. The latter has a lower price and quality, and then lays other hard textures on the concrete base to make the finishes. 
Plant decoration waterway transformation steps explained
1, construction tools: cutting machine, shovel, hammer forging, fuser, pipe arrows, pipe wrenches, wrenches, construction materials: PPR hot melt pipe, pipe fittings, raw material, plug, cement nails and so on.
2. Before the waterway reconstruction, determine the location and movement plan of the pool, floor drain, and the upper and lower water.
3. Sketch the waterway construction plan and draw the construction line on the wall and on the ground.
4. Cut along the ink line with a cutting machine, then shave the slot with an electric spatula and hammer forging, and the depth requirement is greater than the diameter of the water pipe by 1cm.
5. First, the water pipe should be cut according to the design idea, placed near the cut groove, and welded together the pipe and the pipe fitting with the hot melter, and be fixed in the groove with the cement nail. Note that the hot and cold water pipes need to be separated by 10 cm.
6. Seal the groove of the water pipe with cement.
7, test the water: the nozzle sealed hot and cold water received together, open the total water valve test, you can also use the pressure gauge to test the water, and then confirm whether the leak. 
The above is about what the Shanghai factory decoration focuses on, and the related contents of the steps for the renovation of the plant decoration waterway are introduced here. I hope this helps everyone. If you still have something that you don’t understand, you can learn more. Please continue to pay attention. Our website.
This Basin Faucet is our answer for lovers of clean lines and strong, dynamic forms. This solid architectural style makes its presence known in your bathroom and kitchen, but not on the environment.
Single Handle Basin Faucet,Bathroom Faucets,Double Basin Faucet Tap,Single Hole Bathroom Faucet
HESHAN CAIZUN SANITRAYWARE CO.,LTD , https://www.nbcaizunsanitaryware.com