In modern life, many families have screens. The screen can be used as a decoration and can separate some places in the home, which is very popular among people. There are various types of screens. Stainless steel partitions mainly refer to partitions made of stainless steel grids or stainless steel laser engraving. Stainless steel partitions can be assembled from a single component or multiple components. Today, Xiaobian will take a look at the installation and classification of stainless steel grate partitions !
Stainless steel grate partition installation
(1) Pre-arrangement: Firstly, according to the shape and size of the components, the position of the installed grate partition is marked, and then the components are pre-aligned and adjusted.
(2) Pulling the wire: After adjusting the position of the component, pull the wire in the horizontal and vertical directions. The wire should be leveled and straightened with the horizontal ruler and the wire hammer to ensure the position of the component after installation is accurate and the surface is flat. Movement, unevenness of the gap, etc.
(3) Assembling: assembling the components together from the bottom up.
The lattice partition assembled by the vertical members:
(1) Pre-buried (retained): When the vertical plate is connected to the upper and lower walls or beams, at the upper and lower connection points, the purchase or leave grooves should be buried according to the vertical plate spacing. If the floral decoration is inserted between the vertical plates, the plate should also be embedded or left.
(2) Vertical plate connection: stand up in the area of ​​the plate and hang straight with a wire hammer. It is connected with the embedded parts or grooves on the wall and the beam, and the connection points can be welded or pumped.
(3) Installation of floral ornaments: The floral decoration in the riser is also welded and inserted into the groove. The welding flower decoration can be carried out after the vertical plate is finished and fixed, and the installation method of the insertion groove should be performed simultaneously with the vertical plate.
Stainless steel lattice partition - classification
Processing color classification: titanium (black titanium), sky blue, titanium, brown, brown, purple, bronze, yellow bronze, green bronze, black rose, rose red, rose gold, titanium white, green, green, Champagne gold, grey, pink, violet.
Process Classification: Electroplating, a process in which a metal film is adhered to the surface of a metal or other material by electrolysis. It can prevent corrosion, improve wear resistance, electrical conductivity, light reflectivity and enhance aesthetics. Water plating, independent of the external power supply in the aqueous solution, rely on the reducing agent in the plating solution for chemical reduction reaction, so that the metal ions continue A process for reducing a metal plating on an autocatalytic surface.
In fact, in recent years, stainless steel carved screens have been loved by many people, because stainless steel carved screens are different from traditional screens and are more beautiful. The above is the small stainless steel grate partition installation and classification that we introduced to you today. The end is over here. For more information, please continue to pay attention to the decoration home network.
More related wonderful reading:
What are the functions of the stainless steel partition screen? Stainless steel partition screen advantages
Hexagon socket head screws, also referred to as hexagon socket bolts, cup head screws and hexagon socket head screws, are different in terms of their names, but they represent the same meaning. The commonly used hexagon socket head cap screws are also 4.8, 8.8, 10.9 and 12.9. Also known as hexagon socket screws, also known as hexagon socket bolts. Its head is hexagonal and cylindrical.
Hexagon Socket Button Head,Hex Socket Button,Button Hexagon Socket,Ss Cup Head Square Neck Bolt
Jiangsu Jiajie Special Screw Co., Ltd , https://www.jiajiescrewcompany.com