Modern home TV sets have long used wall-mounted type instead of traditional seat-type TV sets. Since wall-mounted TV sets are installed on the wall, attention should be paid during installation and use, especially when installing. Falling down, in addition, there are many factors to consider when using a wall-mounted TV, mainly in the following aspects:
1, leave enough space for the interface:
Because some signal cable plugs are relatively large, such as some HDMI plugs, the interface or plug is easily damaged when hard plugged. Most of these problems are the use of non-original pylons with unreasonable design. These pylons are not designed with too many installation problems in mind, so it is recommended to choose a well-designed original pylon.
2, finishing the troubled connection:
The complicated interface of the TV brings a variety of annoying connections. How to hide the various interface connections exposed when the TV is hanging on the wall should be taken into consideration when decorating. For example, you can add some baffles or three-dimensional fasteners to the side of the TV wall to make the connection pass from the back. If it is a renovated environment, consider adding some opaque decorations.
3. Choose a reasonable interface layout:
The most troublesome thing about wall-mounted installation is the connection of signal lines. If all the interfaces are on the back of the fuselage, it will be very troublesome to replace or temporarily add video sources. When you choose a TV, the layout of the interface is also an important factor when you consider the model. The most reasonable design should be on the left and right sides or the lower interface, and most of the interfaces are designed. The best way is to equip each interface with an extension cable so that the connection to the wall can be fixed. After replacing the signal source, you only need to connect it elsewhere.
Concerned about surprises
Tags: Things to note when using a wall-mounted TV
Previous: Uncover the exclusive "quality" of geothermal wood flooring Next: How to match the color of roadside stone?
Material characteristic: Using high quality aluminum extruded shutter profiles, multi-layer painting or film layer surface have excellent scratch resistance function, not decay, wearable and anti-collision.Nice white profiles, accepting mass customization according to users requirements(light gray, brown, cream, wood, fused, sand color and light sand color ,etc.)
Integrated protection and decorative features together,the best replacement of traditional theft network security replacement; flexible way open ways, supporting hand control, group control. The door could be your safe rescue channel when in emergency.
When in state of close, support ventilation and lighting, this contribute to enhance the cooling and heating effect of air conditioner, ensure safety, comfortable, energy saving, noise isolation and aesthetics.
Aluminum Roller Shutter Door,Commercial Aluminum Roller Shutter Door,Aluminum Alloy Roller Shutter Door,Color Steel Aluminum Roller Shutter Door
Shenzhen Hongfa Automatic Door Co., Ltd. , https://www.hongfadoor.com