Toilets , also known as toilets in our daily routine. Everyone should have the feeling that toilets can now be said to be household toilets. Now, toilets are divided into four types according to the type of sewage: flush, siphon, siphon, and siphon swirl. Then how to buy toilets, toilets and maintenance methods are what? Here follows the Xiaobian to understand it. 
How to choose a toilet
1. Observe the gloss of the toilet
Toilets with high gloss are more compact and easier to clean.
2. See if the glaze is even
When people buy toilets, they can ask businesses if there is any glazing in the toilet's sewage outlet. Because in fact, many reasons for the pollution of toilet bowls are poor glazes, and the qualified glazed feel is very delicate. In glazed corners, you can touch it to see if the glaze will be too thin, uniform, and not too rough.
3. Toilet flushing method
Whether the toilet can be flushed is directly related to the flushing method of the toilet. The current domestic toilets are generally based on the straight type and the siphon type.
The flush toilet is designed to use the self-gravity of flushing when flushing water to press the dirt out of the trap of the toilet to achieve the discharge of sewage, and its advantage is that the discharge capacity is very strong; and the siphon type toilet is The siphon force generated in the flushing pipe of the toilet when flushing is used to suck the dirt out of the trap of the toilet bowl to achieve the purpose of discharging the sewage. The advantage is that splashing is avoided when the flushing is performed, and the cylinder flushing effect is cleaner. 
4. Toilet water consumption
For the sake of saving water, everyone pays more attention to the purchase. There are two ways to save water in toilets. One is to save water, and the other is to save water through the reuse of wastewater. Many water-saving toilets on the market today have certain differences from ordinary toilets. It has the function of saving water, maintaining cleansing function and excrement at the same time.
5. Test water saving performance
Many products on the market claim to use a 6-liter water-saving design, but in reality, it is difficult for ordinary consumers to discern actual results, and it is recommended to purchase well-known brand products.
Toilet maintenance method
1. If you are flushing the toilet with warm water, be sure to remember to control the water temperature between 10 degrees Celsius and 45 degrees Celsius, because the overheated water is poured into the toilet bowl and it is possible to burst.
2. Do not flush the toilet bowl with newsprint, paper diapers, etc.
3. When blocked, remove it with a skin aspirator in time. 
4. To prevent breakage and water leakage, do not hit the ceramic and avoid violently hitting the cover plate and seat ring.
5. Never use a steel brush and a strong organic solution to clean it. This will destroy the glazed surface of the toilet and corrode the pipes.
6. Clean it at least once a week.
7. Clean the filter at least once a month to prevent it from entering the water slowly or without water and affecting normal use.
8. Do not use chlorine-containing cleaners in the water tank. Doing so may damage the equipment in the tank and cause leakage or damage to the structure of the building. 
Editor's summary: The above is Xiaobian's introduction on how to buy a toilet and how to maintain the toilet . After reading this article, everyone should have a more comprehensive understanding of the toilet 's purchase and maintenance methods. It. I hope this article will help when you buy a toilet.
LED projector lens,Plastic Plano-convex Lens,Plastic Photoelectric Sensor Lens
Dongguan Lianlong Photoelectric Technology Co., Ltd , https://www.lianlonggd.com