A: Classification of explosion-proof lighting
1. Explosion-proof lighting explosion-proof categories, levels and temperature groups see national standards.
2. According to the explosion-proof type, it can be divided into 5 types: explosion-proof, increased safety, positive pressure, non-sparking and dust explosion-proof. It can also be combined by other explosion-proof types and the above-mentioned various explosion-proof types or composite type and special type. .
3. According to the type of protection against electric shock can be divided into I, II, III category. The protection against electric shock is to prevent the explosion-proof lamp housing from being easily touched and the parts are electrified, so that the human body is exposed to electric shock or conductors with different potentials to generate electric sparks and ignite the explosive mixture.
AI class—On the basis of basic insulation, accessible conductive parts that are not energized during normal operation are connected to the protective ground conductor in the fixed line. Class BII - Use double insulation or reinforced insulation as a safety measure without grounding protection.
Class CIII - Use a safe voltage with an effective value of not more than 50V, and no voltage above it will be generated.
Category D0 - only rely on basic insulation as a safety protection measure. Most of the explosion-proof lamps and lanterns are protected against electric shock and they are Class I and only a few are Type II and Type III lamps. For example: all plastic explosion-proof lamps, explosion-proof flashlight Jane.
4. Classified according to the protection class of the enclosure: In order to protect the dust, solid foreign matter and water from entering the lamp cavity and touching or accumulating on the live parts to cause flashover, short circuit or damage to the electrical insulation, there are a variety of enclosure protection methods to protect the electrical Insulation effect. The characteristic letter “IP†followed by two digits is used to characterize its enclosure protection level. The first number indicates the protection against humans, solid objects or dust. Divided into 0-6 levels. Explosion-proof lamps are sealed lamps. Their dust-proof capacity is at least 4 levels. The second number represents the protection against water and is divided into 0-8 grades.
5. According to the lighting design of the supporting surface material classification: indoor explosion-proof lighting may be installed on many ordinary surface of combustible materials, such as wooden walls and ceilings, they do not allow explosion-proof lighting installation surface temperature exceeds the safety value. According to whether explosion-proof lamps can be installed directly on the surface of ordinary combustible materials, they can be classified into two categories. One category is lamps that are only suitable for installation on non-flammable surfaces. The other category is lamps that are suitable for direct installation on the surface of ordinary combustible materials and are marked with symbols.
6. According to the use of the installation can be divided into fixed, portable, portable.
II: Wei Chong explosion-proof lighting advantages
1. Explosion-proof type with the highest explosion-proof rating, which can be safely used in various flammable and explosive places;
2, light sources, electrical appliances are all used in Germany brand, power factor is greater than 0.9, longer life, more stable performance, good light transmission, the same power brightness increased by 10% -20%, eliminating the hassle and inconvenience of frequent replacement of light bulbs;
3, transparent parts through optimized design and processing, soft light, uniform illumination, no ghosting, effective to avoid eye discomfort and fatigue;
4, the shell is made of light alloy material and after electrostatic spraying treatment, wear resistance, corrosion, waterproof and dustproof, can be used in harsh environments;
5, exquisite structural design, good heat dissipation, effectively reduce the lamp body temperature, improve the lamp life; 6, light weight, small size, beautiful, easy to operate. Fixed Explosion Proof Lamps III: Main Technical Parameters
Explosion-proof mark ExdeIICT6/T4 introduction cable φ8mm~φ14mm
DIPA20TA, T6/T4
Rated voltage AC220V50Hz to height ratio 2.5
Protection class IP56 lamp body dimensions φ200×315mm
Insulation class I power box dimensions 310×237×85mm
Anti-corrosion grade WF2 total weight (Kg) 10
Note: 70W explosion-proof mark: ExdeIICT6; 100W, 150W explosion-proof mark: ExdeIICT4;
1. Explosion-proof lighting explosion-proof categories, levels and temperature groups see national standards.
2. According to the explosion-proof type, it can be divided into 5 types: explosion-proof, increased safety, positive pressure, non-sparking and dust explosion-proof. It can also be combined by other explosion-proof types and the above-mentioned various explosion-proof types or composite type and special type. .
3. According to the type of protection against electric shock can be divided into I, II, III category. The protection against electric shock is to prevent the explosion-proof lamp housing from being easily touched and the parts are electrified, so that the human body is exposed to electric shock or conductors with different potentials to generate electric sparks and ignite the explosive mixture.
AI class—On the basis of basic insulation, accessible conductive parts that are not energized during normal operation are connected to the protective ground conductor in the fixed line. Class BII - Use double insulation or reinforced insulation as a safety measure without grounding protection.
Class CIII - Use a safe voltage with an effective value of not more than 50V, and no voltage above it will be generated.
Category D0 - only rely on basic insulation as a safety protection measure. Most of the explosion-proof lamps and lanterns are protected against electric shock and they are Class I and only a few are Type II and Type III lamps. For example: all plastic explosion-proof lamps, explosion-proof flashlight Jane.
4. Classified according to the protection class of the enclosure: In order to protect the dust, solid foreign matter and water from entering the lamp cavity and touching or accumulating on the live parts to cause flashover, short circuit or damage to the electrical insulation, there are a variety of enclosure protection methods to protect the electrical Insulation effect. The characteristic letter “IP†followed by two digits is used to characterize its enclosure protection level. The first number indicates the protection against humans, solid objects or dust. Divided into 0-6 levels. Explosion-proof lamps are sealed lamps. Their dust-proof capacity is at least 4 levels. The second number represents the protection against water and is divided into 0-8 grades.
5. According to the lighting design of the supporting surface material classification: indoor explosion-proof lighting may be installed on many ordinary surface of combustible materials, such as wooden walls and ceilings, they do not allow explosion-proof lighting installation surface temperature exceeds the safety value. According to whether explosion-proof lamps can be installed directly on the surface of ordinary combustible materials, they can be classified into two categories. One category is lamps that are only suitable for installation on non-flammable surfaces. The other category is lamps that are suitable for direct installation on the surface of ordinary combustible materials and are marked with symbols.
6. According to the use of the installation can be divided into fixed, portable, portable.
II: Wei Chong explosion-proof lighting advantages
1. Explosion-proof type with the highest explosion-proof rating, which can be safely used in various flammable and explosive places;
2, light sources, electrical appliances are all used in Germany brand, power factor is greater than 0.9, longer life, more stable performance, good light transmission, the same power brightness increased by 10% -20%, eliminating the hassle and inconvenience of frequent replacement of light bulbs;
3, transparent parts through optimized design and processing, soft light, uniform illumination, no ghosting, effective to avoid eye discomfort and fatigue;
4, the shell is made of light alloy material and after electrostatic spraying treatment, wear resistance, corrosion, waterproof and dustproof, can be used in harsh environments;
5, exquisite structural design, good heat dissipation, effectively reduce the lamp body temperature, improve the lamp life; 6, light weight, small size, beautiful, easy to operate. Fixed Explosion Proof Lamps III: Main Technical Parameters
Explosion-proof mark ExdeIICT6/T4 introduction cable φ8mm~φ14mm
DIPA20TA, T6/T4
Rated voltage AC220V50Hz to height ratio 2.5
Protection class IP56 lamp body dimensions φ200×315mm
Insulation class I power box dimensions 310×237×85mm
Anti-corrosion grade WF2 total weight (Kg) 10
Note: 70W explosion-proof mark: ExdeIICT6; 100W, 150W explosion-proof mark: ExdeIICT4;
T900
Width : 900mm
Efficient width : 840mm
Thickness : 1.3mm, 1.5mm, 2.0mm, 2.5mm, 3.0mm
Length : customized
Aplication : villa, residential roof, etc.
T1130
Width : 1130mm
Efficient width : 1050mm
Thickness : 1.3mm, 1.5mm, 2.0mm, 2.5mm, 3.0mm
Length : customized
Aplication : villa, residential roof, etc.
T1350
Width : 1350mm
Efficient width : 1260mm
Thickness : 1.3mm, 1.5mm, 2.0mm, 2.5mm, 3.0mm
Length : customized
Aplication : villa, residential roof, etc.
T1360
Width : 1360mm
Efficient width : 1260mm
Thickness : 1.3mm, 1.5mm, 2.0mm, 2.5mm, 3.0mm
Length : customized
Aplication : villa, residential roof, etc.
Trapezoidal UPVC Roof Sheet,Corrugated Roof Panels,Corrugated Plastic Panels,Corrugated Plastic Roofing
FOSHAN CHANCHENG XINGFA TILE INDUSTRY CO., LTD. , https://www.upvcsheetsupplier.com