Tiles are an indispensable part of our decoration, and its use area is large, so everyone's attention to it has been very high, we all know that tiles are inseparable from the paste of tile adhesive, so when choosing Everyone doesn't know how to use it. So how much do you know about the tile clay formula ? Today, Xiaobian will take a look at the tile clay formula and how to use it!
Tile clay formula:
Application 1: For processing ceramic tile adhesive / tile adhesive, the reference formula is as follows: 1, 42.5 plain silicon cement: 400 kg 2, 40-70 mesh heavy calcium powder: 350 kg 3, 80-150 mesh quartz sand: 150 Kilogram 4,400 mesh heavy calcium powder: 100 kg 5, 2 # colloidal crystal: 15-20 kg total: 1015 kg -1020 kg.
Application 2: For processing vitrified brick binder/mosaic binder, the reference formula is as follows: 1. 42.5 plain silicon cement: 250 kg 2, 40-70 mesh quartz sand: 350 kg 3, 80-150 mesh quartz sand : 150 kg 4,400 mesh heavy calcium powder: 100 kg 5, 2 # colloidal crystal: 20-25 kg total: 1020 kg -1025 kg.
Tile clay use:
1. Stir the mixture with viscose and water at a ratio of about 3.3:1 (25kg/bag and about 7.5kg of water) until it is still paste. After standing for 10 minutes, stir it again and put it into use.
2. Apply the glue evenly on the work surface with a toothed scraper, apply about 1m2 each time, and then press the tile on the wall (without water-immersed bricks).
3, the deep ditch of the tile or stone in addition to the work surface, but also on the back of the brick or stone back.
4. At least 1.5mm gap between brick and brick is required. It is recommended to use PSN mold-proof caulk for caulking.
5. After 24 hours of paving, you can step into or fill in the seams. Dosage: depending on the sizing degree of the wall and the toothed squeegee, generally 1.7-5.0 kg per square meter.
Tile clay notes:
1. The construction temperature is 5-40 °C.
2, it is best to use an electric mixer to stir, stir again after standing to help increase the adhesion.
3. The ratio of tile rubber powder to water can be adjusted according to the different materials, weather and construction conditions.
4. When constructing in rainy days, be sure to do the shielding protection measures, and make sure that the construction area is not wet by rain within 24 hours after tiling.
5, the prepared tile clay should be used within 2-3h according to weather conditions.
6. Never use the tiled cement that has been dried before mixing it with water.
7. After the paving is completed, the next step of caulking can be carried out after the tile cement is completely dried (about 24h).
8. The scraping of the tile cement should be even and full, and the thickness of the bonding layer should be about half of the pitch of the toothed scraper used.
The quality of tiles is also very much related to tile clay, so pay more attention when using them. The above is the tile clay formula and use method introduced by Xiaobian today. It is over here. For more information, please continue to pay attention to the decoration home.
Thermostatic Shower Set,Thermostatic Shower,Head Shower Set,Shower Mixer Taps
kaiping aida sanitary ware technology co.,ltd , https://www.aidafaucet.com