First, under normal circumstances, our integrated ceiling is installed in the kitchen, bathroom. If cleaning, this should be solved separately. First talk about the kitchen, usually the kitchen plate will choose to pull or nano roll coating more, there are a small number of customers in order to save money with the coating plate, drawing board and nano-plate oil resistance is very good, usually Just use a soft cloth to wipe it, but because it is in the kitchen, it will be somewhat oily. If you do not clean it for a long time, then you need to do deep cleaning, use a small amount of detergent, but it must be sufficient. The water to be mixed in, use a relatively soft, absorbent cloth to wash the water after a good scrub, the middle can be hard to point does not matter, but on the four when the surrounding, the force should be light.
Second, pay special attention to the fact that it is not a matter of scrubbing with hard objects and cleaning balls. Once wiped, it will leave a few small scratches on the glossy panel, which will damage the gussets. If it is brushed or nano Roller coating is fine, if it is coated it is not very good. After the membrane is applied to the kitchen, deep cleaning should be performed once a month. The drawing board and the nano-roller coating should be done once every six months to once a year. Deep cleaning should be carried out in two separate passes. The first pass should be wiped with a soft towel that has been wetted with water, and the second time it should be wiped with clear water. The ventilation can be done naturally and dry.
Third, if the ventilation of the sun is not good, then a good quality paper towel can also be used once. Another point is that if you are using aluminum plates that are very thick and very inexpensive, be careful because they have a lot of iron inside, not the aluminum-magnesium alloy gussets, so after seeing water, it's easier. Rusted. The lining of the bathroom, generally speaking, there is no oil stains, just take care of cleaning, often with a soft cloth to scrub with water on OK, OK, with a kitchen cleaning method to do a deep cleaning a year is enough. The kind of difference that we have to explain here is that it is better to use less cleaning and cleaning. Usually, we can remove the dust with a soft cloth, because the more we wash, the faster the rust will come out. There is no problem with a good board for ten years, but a cheap iron-clad lining has only three years' chance. After three years, it will start to rust out from the edge. In the end, it will be ridiculous and it will be regrettable. For a cheaper one or two dollars.
Ceilings Integrated ceilings Integrated ceiling Appliances Kitchens Integrated ceilings Toilet ceilings
Auto Parts,Bearing Spring,Large High Precision Bearing Spring
Compression Spring,Extension Spring,Torsion Spring Co., Ltd. , http://www.nssprings.com