When building is waterproof, you must choose the right waterproof material so as to better play the function of the waterproof material, and it will play a very good waterproof effect. Here we will learn together about the construction and application of building waterproof materials , and we hope to help everyone.
The construction and application selection of building waterproof material is the key to suitable waterproof material
Different construction waterproof parts should choose the appropriate waterproof material construction, building waterproofing is based on different parts of the choice of waterproof material is not the same, some parts suitable for waterproofing membrane, some parts suitable for waterproof coating, etc., each part of Waterproof requirements are not the same. Each type of waterproof material has its own strengths and weaknesses. A material cannot cover the world. Materials used everywhere are not. All kinds of materials can only complement each other and cannot be replaced. Roof waterproofing and waterproofing in the basement require different material properties, and the waterproofing between the bath and the wall is more different. Sloping roofs, complicated roofs, and metal roofing roofs are also different. When selecting materials, consider the difference.
1. The roofing waterproof layer is exposed to nature, exposed to hot sunlight, wind swells, erosion of rain and snow, temperature and cold in summer, temperature changes in day and night, and changes in expansion and contraction repeatedly, without excellent wood properties and good protection. Measures, it is difficult to achieve the required durability. Therefore, a waterproof material with high tensile strength, high elongation, and good aging resistance should be selected.
2, why the wall leakage, are now because the wall is too thin, mostly light block masonry, a large number of internal and external joints, and then the door and window and the wall joints, sealing is not strict, rain from the seam infiltration. Waterproof wall can not use the coil, can only use waterproof coating, but also combined with exterior decoration materials. Only sealant can solve the problem.
3, underground building waterproof material, underground waterproof layer soaked in water or very wet soil for many years, waterproof material must be good water resistance.
There are three characteristics of waterproofing in toilets and baths. The first is not affected by the natural climate, the temperature change is not, the material's elongation rate is not high; second, the area is small, there are many yin and yang angles, and there are many pipes through the floor; Third, the waterproof layer on the wall is tiled and bonded Agent affinity is good. According to the above three characteristics, the coil material cannot be selected. Only the waterproof coating is most suitable.
The above construction and application of building waterproof materials are briefly introduced here, and I hope to help you. For more information, please visit this website. Stay tuned.
Bathroom waterproof material decoration waterproof bathroom waterproof
Hydrofluoroether is a class of hydrofluorocarbons containing ether bonds in its molecular structure. Its atmospheric ozone consumption is zero, atmospheric retention is short, greenhouse effect is not high, it is not flammable, toxicity is low, good solubility, surface tension Low, low viscosity, low wettability, good compatibility with metals, plastics, etc., no fumes, good insulation properties, widely used in liquid crystal displays, high-grade printed circuit boards, automotive carburetor, precision instruments Manufacturers such as instrument components.
Cleaning Solution For Liquid Crystal
Cleaning Spray,Solutions For Cleaning,Hydrofluoroether Inert Cleaning Agent,Cleaning Solution For Liquid Crystal
Guangdong Giant Fluorine Energy Saving Technology Co.,Ltd , https://www.tuwtech.com