The main body of the decoration strategy

After the completion of the construction work, the decoration and hard-wearing construction really began.

The first step is to dismantle and modify the main body, which needs to be dismantled and newly built, all completed at this stage.

The main body dismantling and modification is the most noisy stage in the whole decoration process, and also the most "violent" stage, mainly including wall demolition, masonry wall, shoveling wall skin, dismantling heating, window replacement, etc., depending on the amount of home work It will last about 5-7 days.

PART1: These places cannot move

1. Bearing wall

The load-bearing wall bears the important task of safety and stability of the entire building.

Some owners do not take it seriously and think that there are so many families and so many load-bearing walls in the whole building, so I will demolish this wall of my house. How much risk can there be? There are even unscrupulous construction teams in order to meet the needs of the owners, patting their chests and guaranteeing that they can be demolished, no problem!

I just want to ask, do you live in this house or the construction team? In the future, something went wrong. Did you or the construction team suffer? Such an unscrupulous construction team, even if you want to settle the accounts after the autumn, you may not be able to find people.

Many people know that the load-bearing wall cannot be dismantled, but some people have a whimsy. If I do n’t dismantle it all, I will dismantle it in half. Is n’t it enough to open a window to show some light? No way!

This will destroy the structure of the load-bearing wall, and there are endless security risks!

Therefore, for our own safety, everyone still abides by the laws and regulations, do not move the load-bearing wall!

How to judge whether it is a load-bearing wall? This is more complicated, and the load-bearing walls of houses with different structures are not the same. For example, the load-bearing walls of brick-concrete structures and frame structures are different.

The safest way is to ask for a floor plan with the property. The standard floor plan will use black to mark the location of the load-bearing wall.

If it does not exist, it can be roughly judged by the thickness of the wall. Generally, walls over 24 cm are load-bearing walls.

2. Light body wall under the beam

Many people know that the load-bearing wall cannot move, but will the light-weight wall be able to move? Not necessarily!

Some light-weight walls also bear part of the weight of the house. For example, the light body wall under the beam cannot be removed.

Because it also bears part of the weight of the house. If demolished, it will destroy the structure of the house. The light body wall and hollow slab that are completely used as partition walls are removable. This kind of wall does not bear any pressure at all, the value of existence is to separate the space, and the demolition will not have any impact on the structure of the house.

3. Low wall by the balcony

Many old house balconies will have such a structure with doors and windows. These doors and windows can be removed, but the low wall under the window cannot be removed.

This section of the wall is called the "counterweight wall" and it serves to provoke the balcony. To put it simply, this low wall is similar to a weighing mound, used to hold down the balcony, and dismantling this wall will cause the bearing capacity of the balcony to drop, and the balcony will fall.

Look at the news, chop a dumpling at home and chop off the entire balcony.

4. House beam

The beams and columns in the room cannot be changed. The beam and column are used to support the upper floor slab. Demolition or reconstruction will cause the upper floor slab to fall, which is quite dangerous. Therefore, the beam and column cannot be removed or modified.

5. Rebar

When grooving and routing cables, it is necessary to avoid steel bars, and it is best not to cross them. If the steel bars are destroyed when the pipeline is buried, it will affect the bearing capacity of the walls and floors. In the event of an earthquake, such walls and floors can easily collapse or break.

PART2: Should we shovel the wall?

Before we know whether to remove the wall, let's briefly look at the structure of the wall coating construction. Covering the outside of the wall, there is plaster and putty, and the surface of the putty is the paint.

Gypsum and putty are generally used to level the wall. Before the paint is painted, the putty must be scraped. The putty is also divided into water-resistant and non-water-resistant types. Needless to say, water-resistant putty has better water and corrosion resistance, and the service life is longer than non-water-resistant putty. Whether you want to eradicate the wall or not depends on the specific situation.

1. If your wall needs to be tiled, such as kitchen and bathroom, balcony, etc., the follow-up will generally involve tiling the wall, regardless of whether the wall uses water-resistant putty, you need to shovel the wall clean , And then tiling.

2. If you do not need to tiling the walls in other spaces, it may not involve tiling. Whether the walls are removed at this time depends on the original wall conditions.

3. There are many old houses. The putty used on the wall is water-resistant putty. At this time, it is necessary to shovel the wall skin clean and then re-process the wall. In newer houses, the wall is mostly made of water-resistant putty. At this time, if the wall is well-preserved, there is no mildew and no hollow, the putty on the wall can be eliminated.

Some people may need to put wallpaper on the wall. At this time, it is necessary to look at the error of the wall. If the error is too large, you can only shovel the original wall skin and do the flatness again.

To what extent is shovel considered qualified?

The new house needs to be shoveled into the cement mortar layer. If the wall is too loose in the old house and there are more than 10 hollows, the red brick layer needs to be shoveled. The entire area is removed during the eradication, including the baseboard position to prevent the decorative materials from falling off in the later period.

How do you see what kind of putty is used on the wall?

1. Sprinkle some water on the wall. If you can rub out the white slurry, it is generally water-resistant putty. This must be removed.

2. You can also try to shovel the wall with a shovel. If it is easy to shovel it off, it is generally a non-water resistant putty that needs to be completely removed.

PART3: Should we remove the floor tiles?

Some people think that this problem has been renovated a lot, why not dismantle it? But in fact, there are often owners consulting with Xiaoqi, can the floor tiles be dismantled, because demolition requires a fee, and installation requires a fee.

If the floor tiles are well preserved, they can still be used. In fact, there is really no need to dismantle them, but the finished products must be protected.

If you plan to lay composite flooring, you can actually consider laying the wooden floor directly on the tiles without removing the floor tiles. However, this method requires the original tiles to be flat to meet the needs of laying wooden floors, and the emptying rate of the tiles cannot be Too high.

In addition, directly laying the wooden floor on the tiles will sacrifice a certain layer height, which depends on the situation in your home.

PART4: In addition to demolition and construction

Although this stage is called the main body demolition, but there is also a work to be carried out at this time, that is to build a new wall.

At present, the new walls in the home are generally made of light-weight bricks. Gypsum boards are usually used for renting houses. The red bricks are not used anymore. They are heavy and heavy, increasing the burden on the floor and occupying land. .

An owner once reacted with Xiaoqi, and his family was going to build a new wall with red bricks. As a result, the neighbors downstairs found them, saying that the floor of the whole building was thin. What should I do if such a thick brick collapsed in case the first floor fell? The neighbor even brought a scale, weighed the bricks, calculated the weight of the entire wall, and firmly refused to use red bricks. Although this neighbor is a bit exaggerated, let's use light-weight bricks for the sake of neighborhood relations.

The new masonry wall is not as simple as our building blocks, there are some problems to pay attention to:

1. The light-weight bricks used in the new masonry wall need to be soaked in water until no bubbles are formed. The first layer of bricks needs to be implanted with steel bars, after which it is implanted every two layers. Reinforcement must not only penetrate the wall, but also be inserted into the connected wall.

2. After the wall is built, double-sided external wire mesh is required, and then cement mortar is applied.

3. If there is a door hole, you need to make a door beam;

4. If the new wall is to be tiled, it needs to be laid in advance and then stabilized for about a week. It will take longer to apply the paint. Generally, it is about 30 days in summer and about 45 days in winter.

Final Tips:

1. Be sure to protect your sewer during the demolition phase. Sand and stone will inevitably enter the sewer during demolition. Some unscrupulous businesses will directly throw construction waste into the sewer. When the owner checks in, the sewer at home will be blocked at both ends for three days. heart;

2. The removal of garbage should be negotiated with the merchant. The general removal company said that the free removal of garbage is generally only delivered to the designated location of the residential property, excluding the transportation of garbage. The transportation of garbage is generally responsible for the property, and the decoration starts. At the time, you paid the relevant fees to the property.

Above content provided by GO good home network

Erucic Acid Amide

Slip Agent,Erucic Acid Amide,Cas 112-84-5,Erucic Amide

Jiangxi Zhilian Plastics & Chemicals Technology Co., Ltd , https://www.zhilian163.com