Should be avoided as long as the outdoor sunlight to the door as a whole or part of the long-term exposure, the placement of the best place to be able to escape the sun coming in, or use transparent gauze curtains to separate direct sunlight. In this way, it does not affect the lighting of the room, but it also allows the soft light to add a warm and romantic atmosphere to the room while protecting the interior doors.
2, away from the humid environmentBecause bamboo doors are very delicate products, water vapor is harmful to bamboo and wood doors.
In winter, it is best to place the door at about 1M away from the heating flow to avoid prolonged high baking, which causes local dry cracking of the wood, distortion of the wood and partial deterioration of the paint film.
4, stain removal skillsAvoid using alcohol, gasoline, or other chemical solvents to remove stains. If there is any stain on the surface of the door, do not rub it hard. Use warm tea water to gently remove the stain. After the water evaporates, apply a light wax to the original part, and then lightly grind it several times to form a protective film.
When cleaning, do not let the cleaning tool touch the door, usually pay attention to, do not let the hard metal products or other sharp objects hit the door to protect the surface from scratch marks.
6. Carefully clean the facadeThe surface of the bamboo door is coated with paint, which is particularly important for the maintenance and maintenance of the paint film. Once the paint film is damaged, it will not only affect the appearance of the surface, but will further affect the internal structure of the product. Therefore, the door should always be kept clean. Every day, use a cotton soft dry cloth to gently test the floating dust on the surface. From time to time, use a wet cotton thread that wrings out moisture to remove fine dust at the corner of the door, and then clean it. The dry soft muslin cloth can be dried, or it can be coated with a thin layer of high-quality light wax after it has been dried. It can be gently wiped off like a leather. This not only maintains the wooden door, but also increases it. Brightness. However, the use of light wax must be careful, must not use low-grade products containing chemical corrosion components.
Bamboo door
MONEL®
The registered trademark name, Monel, is applied as the prefix name to several corrosion resistant alloys produced by Special Metals Corporation. These alloys are nickel-based and exhibit traits that include high resistance to atmospheric corrosion, salt water, and various acid and alkaline solutions.
Alloys of identical chemical and mechanical properties are available from other manufacturers and offer excellent alternatives to the various Monel® brand alloys.
The corrosion-resistant alloy is widely used in the marine, oil and chemical processing industries.
Monel Availability
Mega Mex supplies Monel 400, K-500 & R-405. Most of these grades are available in the form of plate, sheet, pipe, tubing, fittings, bar, wire and rod.
What are the Characteristics of Monel ?
Good resistance to acids such as hydrofluoric and sulfuric acid
Highly resistant to alkalis
Malleable
Highly corrosion resistant
Stronger than steel
In what Applications are Monel alloys used ?
Pump shafts, oil-well tools, instruments, doctor blades and scrapers, springs, valve trim, fasteners, marine propeller shafts
Marine components
Chemical and hydrocarbon processing equipment
Valves, pumps, shafts, fittings, heat exchangers
Monel Trivia
Monel was discovered by Robert Crooks Stanley who worked for the International Nickel Company in 1901. The new alloy was named in honor of the president of the company, Ambrose Monell.
*Monel® is a registered trademark of Special Metals Corporation group of Companies.
Monel Heat Exchanger Tube,Monel 400 Heat Exchanger Tube,Monel 400 Astm Tube
YUHONG GROUP CO.,LIMITED , https://www.alloypipeline.com