(1) Mixing the equipment of the main machine: properly raise the lower plane of the mixer chassis, and connect the legs to the main machine with hinges. The equipment is good for cement scales, water scales and admixture scales. It can be lifted, measured and adjusted. With the horizontal condition, the center line of each leg coincides with the base center line, and then the anchor bolt can be poured into the reserved pit (or the base and the embedded part are welded).
(2) Some other equipment: After the end of the main machine and cement storage equipment, the equipment screw conveyor can be used. Before lifting, check the lubrication points and oil and grease. It is necessary to carry out the empty operation test and find the problem in time. Some equipments are in place according to the requirements of the basic drawing. The small batching machine can be placed on the plane of the solid foundation pier. The large batching machine begs for the anchor bolts. After the equipment is finished, check all the equipment. The lubrication point is filled with lubricating oil (the lubricating oil in the northeast region that needs to be replaced with suitable low temperature conditions) or grease, and the wiring and the empty working test can be carried out according to the instructions and the electrical schematic diagram.
(3) The ground screw of the cement silo is poured into the foundation pit. When the center line of the cement silo bracket is adjusted to coincide with the base center line, the four flanges on the same level are adjusted (measuring method: theodolite or diameter 8-10) The transparent plastic hose plus colorful water measurement), that is, the optional concrete pouring. The trademark of concrete for reserved pit casting should be one level higher than the concrete used for foundation. In the winter construction, in order to shorten the construction period, the concrete used should be added with early antifreeze.
Buying the preferred Zhengzhou Jinyu Construction Machinery Co., Ltd., learn more about the concrete mixing plant. You can visit our website to check or call our free order hotline 400-963-9100
Http://news.chinawj.com.cn
Editor: (Hardware Business Network Information Center) http://news.chinawj.com.cn
PS Sheet is commonly known as "organic board", chemical name Polystyene polystyrene, density 1.02 ~ 1.08 is a thermoplastic, transparency is higher (light transmittance is second only to organic glass), has excellent electrical insulation, high frequency insulation Especially good, the quality is brittle, the impact resistance, weather resistance and aging resistance are inferior to plexiglass, the mechanical processing properties and thermal processing properties are not as good as plexiglass, it can resist general chemical corrosion, the chemical properties are stable, the hardness is similar to plexiglass, The water absorption rate and thermal expansion coefficient are less than plexiglass, and the price is cheaper than plexiglass.
PS Sheet is made of polystyrene as the main raw material, extruded, can be freely colored, odorless, tasteless and non-toxic, does not cause fungus growth, has the advantages of rigidity, insulation, good printability, etc. It is mainly used for packaging, container equipment, Daily decoration, general electrical appliances and construction industries.
Polystyrene Sheet ( PS Plate ) is made by extrusion, main raw material is polystyrene granule. Mainly used for packaging, container equipment, General electrical and construction and other industries.
PS polystyrene decorative board is a high-molecular organic board extruded by polystyrene granule molding compound on the extruder unit.
PS Sheet
PS Sheet,PS Board,PS Panel,PS Polystyrene Sheet
SHENZHEN XIONGYIHUA PLASTIC INSULATION LTD , https://www.xyhplastic.com