1. Because the filling machine is an automatic machine, the size of the easy-open bottle, bottle mat and cap are required to be uniform.
2. When adjusting the machine, the tool should be used properly. It is strictly forbidden to use excessive tools or excessive force to remove the parts to avoid damage to the machine or affect the performance of the machine.
3. When the machine is adjusted, be sure to tighten the loose screws. Rotate the machine with the rocker to see if the motion meets the requirements before driving.
4, the machine must be kept clean, it is strictly prohibited to have oil, liquid or glass debris on the machine, so as not to cause damage to the machine, here should pay attention.
a. In the production process, the machine removes the liquid medicine or glass debris in time.
b. Clean all parts of the machine surface before handing over, and add clean lubricating oil to each activity department.
c. Scrub once a week, especially in areas that are not easily cleaned during normal use or blown off with compressed air.
Concerned about surprises
Label: Use and maintenance of edible oil filling machine
Previous: Maintenance Precautions for Labeling Machine Next: Maintenance Considerations for Inverters
Centerless Grinding is also called centerless grinding, which is a kind of grinding process. There are two grinding wheels for the guide wheel and the grinding wheel. The guide wheel drives the cylindrical workpiece to rotate on the shim, and the grinding wheel plays a grinding role on the workpiece. Unintentional grinding belongs to the Zhou Mo method.
The heart grinding method is composed of three mechanisms: a grinding wheel, an adjustment wheel and a workpiece support (bracket), in which the grinding wheel actually performs the grinding work, the adjustment wheel controls the rotation of the workpiece, and causes the workpiece to enter the cutting speed As for the workpiece support, which supports the workpiece during grinding, there are several ways to match these three parts, except for stopping grinding, which is the same in principle.
Centerless Grinding
Centerless Grinding,Centerless Grinding Parts,Grinding Multi-Section Small Shaft,Centerless Grinding Small Shaft Processed
Dayue Precision Technology (Dongguan) Co., Ltd. , https://www.dayuechn.com