§ 1. Start by loosening all the screws and completely removing the two screws. Once the grease has been applied to the plunger, carefully screw it back into the corresponding hole on the plunger shaft. Make sure the threads are aligned properly to avoid cross-threading.
§ 2. Next, evenly tighten the screws in a crisscross pattern to gradually loosen the sleeve that is fitted over the hub. This ensures even pressure distribution and prevents damage to the components.
§ 3. After the sleeve is sufficiently loosened, carefully remove the pulley along with the tapered sleeve from the shaft. Be cautious not to force it if it doesn’t come off easily.
§ 4. If the sleeves and shafts are stuck due to rust or tight fit, use a flat screwdriver to gently widen the slots on the tapered sleeve. Work slowly and apply minimal pressure to avoid cracking or bursting the sleeve. Always double-check the alignment before reassembling any parts.
This step-by-step guide ensures a safe and efficient removal process while maintaining the integrity of the mechanical components involved.
Commercial Kitchen Equipment
Hotop is your one stop shop for a huge range of commercial kitchen equipment for hotel or restaurant.
The commercial kitchen equipment range from cooking equipment, refrigeration equipment, bakery equipment, stainless steel bench and sink,etc.helps to equip any functional kitchen you need.
With over 10 years experience, and large range of kitchen equipment, Hotop is the best option for hotel and restaurant supply.
Hotel kitchen Equipment,Commercial Kitchen Appliance,Cooking Equipment,Refrigeration Equipment,kitchen food processor,stainless steel kitchen table
Guangzhou Hotop Hotel Supplies Co.,Ltd , https://www.hotopsupply.com